NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
STARTECH
Adds a DB25 parallel port and a DB9 RS232 serial port through a PCI Express x1 2.0 slot
The PEX1S1P950 adds one DB25 parallel port and one DB9 serial port to a desktop through a single PCI Express x1 2.0 slot. It targets technicians and industrial users who still drive printers, scanners, plotters or RS232 equipment that lack USB or native motherboard headers.
The card uses a full-height bracket so it fits typical tower chassis without a low-profile swap. Both DB25 and DB9 ports are mounted directly on the bracket, giving secure screw-down connections that resist vibration in rack or bench environments. The Asix AX99100 controller handles the parallel interface while a 16C950 UART drives the serial side.
This model supersedes the earlier 952 card, raising the DB25 maximum to 2.5 Mbps and keeping the DB9 at 921.6 Kbps. The upgrade is worthwhile when legacy software demands ECP or EPP parallel modes under IEEE 1284, or when a 16C950-compatible UART is required for timing-sensitive serial gear. It is not suited for builds that need more than one legacy port of each type.
| Brand | StarTech.com |
|---|---|
| Model | PEX1S1P950 |
| Type | PCIe Card with Serial and Parallel Port |
| External Ports | DB-25 (25 pin, D-Sub) DB-9 (9 pin, D-Sub) |
| Standard | PCI Express x1 |
| Features | PCIe Card with Serial and Parallel Port Add a DB25 parallel and a DB9 RS232 serial port using a PCIe x1 2.0 full profile PCIe card slots Upgraded version of popular card PEX1S1P952 DB25 Speeds up to 2.5Mbps SPP/Byte/ECP modes IEEE 1284 Asix AX99100 DB9 Speeds up to 921.6Kbps 16C950 UART Use PCI Express expansion combo card w/printer/scanner/plotter PCI-e Base Spec Rev 1.1 PCI Power Mgmt 1.2 Adapter card supports Windows 7+/Server 2003+/Linux 2.6.X+ |
| Siuntos svoris | 0.14 kg |
| Pakuotės dydis | 170 × 142 × 30 mm |
The card plugs into a PCI Express x1 2.0 slot and follows the PCI-e Base Spec Rev 1.1, giving 2.5 Gbps per lane.
It needs one full-profile PCIe x1 2.0 slot and fits a standard DB-25 and DB-9 bracket cut-out.
Power off the PC, insert the card into a free PCIe x1 slot, secure the bracket screw, then install the Windows 7+, Server 2003+ or Linux 2.6+ drivers before connecting legacy devices.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?