NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.
STARTECH
Adds a DB25 parallel port and a DB9 RS232 serial port through a PCI Express x1 2.0 slot
The PEX1S1P950 adds one DB25 parallel port and one DB9 serial port to a desktop through a single PCI Express x1 2.0 slot. It targets technicians and industrial users who still drive printers, scanners, plotters or RS232 equipment that lack USB or native motherboard headers.
The card uses a full-height bracket so it fits typical tower chassis without a low-profile swap. Both DB25 and DB9 ports are mounted directly on the bracket, giving secure screw-down connections that resist vibration in rack or bench environments. The Asix AX99100 controller handles the parallel interface while a 16C950 UART drives the serial side.
This model supersedes the earlier 952 card, raising the DB25 maximum to 2.5 Mbps and keeping the DB9 at 921.6 Kbps. The upgrade is worthwhile when legacy software demands ECP or EPP parallel modes under IEEE 1284, or when a 16C950-compatible UART is required for timing-sensitive serial gear. It is not suited for builds that need more than one legacy port of each type.
| Brand | StarTech.com |
|---|---|
| Model | PEX1S1P950 |
| Type | PCIe Card with Serial and Parallel Port |
| External Ports | DB-25 (25 pin, D-Sub) DB-9 (9 pin, D-Sub) |
| Standard | PCI Express x1 |
| Features | PCIe Card with Serial and Parallel Port Add a DB25 parallel and a DB9 RS232 serial port using a PCIe x1 2.0 full profile PCIe card slots Upgraded version of popular card PEX1S1P952 DB25 Speeds up to 2.5Mbps SPP/Byte/ECP modes IEEE 1284 Asix AX99100 DB9 Speeds up to 921.6Kbps 16C950 UART Use PCI Express expansion combo card w/printer/scanner/plotter PCI-e Base Spec Rev 1.1 PCI Power Mgmt 1.2 Adapter card supports Windows 7+/Server 2003+/Linux 2.6.X+ |
| Fraktvekt | 0.14 kg |
| Pakkestørrelse | 170 × 142 × 30 mm |
The card plugs into a PCI Express x1 2.0 slot and follows the PCI-e Base Spec Rev 1.1, giving 2.5 Gbps per lane.
It needs one full-profile PCIe x1 2.0 slot and fits a standard DB-25 and DB-9 bracket cut-out.
Power off the PC, insert the card into a free PCIe x1 slot, secure the bracket screw, then install the Windows 7+, Server 2003+ or Linux 2.6+ drivers before connecting legacy devices.
Også i denne avdelingen
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Det du betaler med, og det du ser prisene i.
Sendes fra lommeboken din i kassen
Kun visning — katalogen er prissatt i USD
Fant ingen valuta.
Velg språket nettstedet snakker til deg på.
Ny her?
Har du allerede en konto?
Det finnes ingen automatisk tilbakestilling: butikken sender ikke e-post, så det finnes ingen engangslenke å be om. La adressen stå på kontoen, så blir den behandlet manuelt.
Forespørsel registrert
Ingenting er på vei til innboksen din — butikken sender ingen e-post i det hele tatt. Noen behandler dette manuelt.
Husket du det likevel?