Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Six green PCIe 16x to 1x riser cards with USB 3.0 cables and SATA power cables

SUIUBUY

SUIUBUY VER 009S 6-Pack PCIe 16x to 1x Riser Kit 60cm

SKU CH-D1DG-YC8QA

Six PCIe 16x to 1x riser boards with 60cm USB 3.0 cables, 6-pin to SATA power, four solid capacitors and over-current protection

  • 60 cm USB 3.0 cable allows flexible GPU placement
  • Four solid capacitors and voltage regulation deliver stable power
  • On-board fuse protects components from short circuits
  • Gold-plated contacts ensure reliable long-term connectivity
  • 6-pin to SATA power cable reduces motherboard load

Six-Pack PCIe 16x to 1x Riser Kit

This kit contains six riser adapters that convert a PCIe 16x slot into a single-lane connection using a 60cm USB 3.0 cable. It is aimed at builders assembling multi-GPU mining rigs who need to space graphics cards away from the motherboard. Each riser draws auxiliary power through a 6-pin PCIe connector that is adapted to a 15-pin SATA plug. No drivers are required for installation.

Single-Lane Electrical Limit

The riser carries only one PCIe lane regardless of the physical slot used, so the connected device operates at x1 electrical width. Bandwidth is therefore limited to the throughput of a single lane, which restricts high-performance GPUs to reduced data rates. The 60cm cable length adds signal travel distance that can affect stability at higher signalling rates. Builders must accept this constrained link when planning their rig layout.

Four Capacitors and Mounting Holes

Each adapter board measures 13cm by 4.4cm by 1.2cm and includes four solid capacitors plus voltage regulation components for stable power delivery. A surface-mounted fuse provides overcurrent protection against short circuits. Gold-plated contacts on the PCIe connector resist oxidation over repeated insertions. Four mounting holes allow the riser card to be screwed securely to a frame, reducing strain on the USB 3.0 cable during daily operation.

Privalumai

  • 60 cm USB 3.0 cable allows flexible GPU placement
  • Four solid capacitors and voltage regulation deliver stable power
  • On-board fuse protects components from short circuits
  • Gold-plated contacts ensure reliable long-term connectivity
  • 6-pin to SATA power cable reduces motherboard load

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Should I choose the 6-pack or would a single riser be enough for my build?

The kit contains six complete riser boards, each with its own 60cm USB 3.0 cable and 6-pin to SATA power adapter, so one pack covers a six-GPU mining rig.

What does the 16x to 1x label mean for GPU performance once the card is installed?

The riser physically converts a 16x slot to a 1x electrical link; the GPU will run at 1x bandwidth, which is typical for mining workloads but reduces throughput for gaming or compute tasks.

The board mentions a SATA power connector — what does that cap in practice?

The 6-pin PCIe to SATA cable draws auxiliary power directly from the supply, limiting the load on the motherboard slot and improving stability for multi-GPU setups.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.