暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Six green PCIe 16x to 1x riser cards with USB 3.0 cables and SATA power cables

SUIUBUY

SUIUBUY VER 009S 6-Pack PCIe 16x to 1x Riser Kit 60cm

SKU CH-D1DG-YC8QA

Six PCIe 16x to 1x riser boards with 60cm USB 3.0 cables, 6-pin to SATA power, four solid capacitors and over-current protection

  • 60 cm USB 3.0 cable allows flexible GPU placement
  • Four solid capacitors and voltage regulation deliver stable power
  • On-board fuse protects components from short circuits
  • Gold-plated contacts ensure reliable long-term connectivity
  • 6-pin to SATA power cable reduces motherboard load

Six-Pack PCIe 16x to 1x Riser Kit

This kit contains six riser adapters that convert a PCIe 16x slot into a single-lane connection using a 60cm USB 3.0 cable. It is aimed at builders assembling multi-GPU mining rigs who need to space graphics cards away from the motherboard. Each riser draws auxiliary power through a 6-pin PCIe connector that is adapted to a 15-pin SATA plug. No drivers are required for installation.

Single-Lane Electrical Limit

The riser carries only one PCIe lane regardless of the physical slot used, so the connected device operates at x1 electrical width. Bandwidth is therefore limited to the throughput of a single lane, which restricts high-performance GPUs to reduced data rates. The 60cm cable length adds signal travel distance that can affect stability at higher signalling rates. Builders must accept this constrained link when planning their rig layout.

Four Capacitors and Mounting Holes

Each adapter board measures 13cm by 4.4cm by 1.2cm and includes four solid capacitors plus voltage regulation components for stable power delivery. A surface-mounted fuse provides overcurrent protection against short circuits. Gold-plated contacts on the PCIe connector resist oxidation over repeated insertions. Four mounting holes allow the riser card to be screwed securely to a frame, reducing strain on the USB 3.0 cable during daily operation.

特長

  • 60 cm USB 3.0 cable allows flexible GPU placement
  • Four solid capacitors and voltage regulation deliver stable power
  • On-board fuse protects components from short circuits
  • Gold-plated contacts ensure reliable long-term connectivity
  • 6-pin to SATA power cable reduces motherboard load

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Should I choose the 6-pack or would a single riser be enough for my build?

The kit contains six complete riser boards, each with its own 60cm USB 3.0 cable and 6-pin to SATA power adapter, so one pack covers a six-GPU mining rig.

What does the 16x to 1x label mean for GPU performance once the card is installed?

The riser physically converts a 16x slot to a 1x electrical link; the GPU will run at 1x bandwidth, which is typical for mining workloads but reduces throughput for gaming or compute tasks.

The board mentions a SATA power connector — what does that cap in practice?

The 6-pin PCIe to SATA cable draws auxiliary power directly from the supply, limiting the load on the motherboard slot and improving stability for multi-GPU setups.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。