Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Square 120 mm RGB case fan with black frame and clear blades, hydraulic bearing, 4 pin and 6 pin connectors included

SXDOOL

SXDOOL DR12 120 mm case fan RGB 38 cfm 1500 RPM 16 dBA hydraulic bearing

SKU CH-867W-Q19XT

A 120 mm case fan delivering 38 cfm airflow at 1500 RPM with 16 dBA noise using a hydraulic bearing rated for 20000 hours

  • Quiet cooling at 16 dBA sound level
  • Strong airflow of 38 cfm for heat removal
  • Hydraulic bearing rated for 20000 hours life
  • RGB LED lighting with 5V addressable control
  • 120 mm frame fits standard case mounts

Single 120 mm RGB fan for quiet airflow

The SXDOOL DR12 is a 120 mm case fan built for builders who want coloured lighting without loud operation. It runs at 1500 RPM and pushes 38 cfm while producing only 16 dBA. A hydraulic bearing rated for 20000 hours keeps friction low over long use. The package includes one fan and four mounting screws.

38 cfm airflow with 16 dBA noise ceiling

At full speed the fan moves 38 cfm, which is enough for moderate component cooling or case circulation. The 16 dBA sound level means it stays near-silent in typical builds. Headroom ends when a high-heat CPU or GPU demands significantly more static pressure or volume than this single fan can supply. Power draw is 1.92 W at 12 V for the motor and 5 V for the LED.

Replaces basic fixed-speed

This unit upgrades from stock fans that run at constant speed, use sleeve bearings, or lack RGB control. The jump is worth it when you need adjustable colour lighting, quieter acoustics, and a longer bearing life in the same 120 mm slot. It does not suit builders who need higher static pressure for dense radiators or dual-fan push-pull configurations.

Privalumai

  • Quiet cooling at 16 dBA sound level
  • Strong airflow of 38 cfm for heat removal
  • Hydraulic bearing rated for 20000 hours life
  • RGB LED lighting with 5V addressable control
  • 120 mm frame fits standard case mounts

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Will the 12 V fan header on my older motherboard power the 1500 RPM fan and 5 V RGB header drive the LED?

Yes, the fan runs on a 12 V four-pin header at 1500 RPM while the RGB LEDs draw power from a separate 5 V four-pin header, both using the included six-pin adapter.

How can I confirm the fan is spinning at the rated 1500 RPM and staying near 16 dBA after installation?

Check the RPM reading in BIOS or fan-control software — it should show roughly 1500 RPM — and listen for a quiet 16 dBA hum; the hydraulic bearing is rated for 20000 hours of operation.

Does the single-fan pack include mounting screws and the six-pin to dual-header adapter, or must I buy them separately?

The box contains one 120 mm RGB fan, four mounting screws and the six-pin connector that splits to a four-pin fan header and a four-pin 5 V RGB header; nothing else is required.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.