Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava

SXDOOL

SXDOOL DR12 120 mm case fan RGB 38 cfm 1500 RPM 16 dBA hydraulic bearing

SKU CH-867W-Q19XT

A 120 mm case fan delivering 38 cfm airflow at 1500 RPM with 16 dBA noise using a hydraulic bearing rated for 20000 hours

  • Quiet cooling at 16 dBA sound level
  • Strong airflow of 38 cfm for heat removal
  • Hydraulic bearing rated for 20000 hours life
  • RGB LED lighting with 5V addressable control
  • 120 mm frame fits standard case mounts

Single 120 mm RGB fan for quiet airflow

The SXDOOL DR12 is a 120 mm case fan built for builders who want coloured lighting without loud operation. It runs at 1500 RPM and pushes 38 cfm while producing only 16 dBA. A hydraulic bearing rated for 20000 hours keeps friction low over long use. The package includes one fan and four mounting screws.

38 cfm airflow with 16 dBA noise ceiling

At full speed the fan moves 38 cfm, which is enough for moderate component cooling or case circulation. The 16 dBA sound level means it stays near-silent in typical builds. Headroom ends when a high-heat CPU or GPU demands significantly more static pressure or volume than this single fan can supply. Power draw is 1.92 W at 12 V for the motor and 5 V for the LED.

Replaces basic fixed-speed

This unit upgrades from stock fans that run at constant speed, use sleeve bearings, or lack RGB control. The jump is worth it when you need adjustable colour lighting, quieter acoustics, and a longer bearing life in the same 120 mm slot. It does not suit builders who need higher static pressure for dense radiators or dual-fan push-pull configurations.

Istaknuto

  • Quiet cooling at 16 dBA sound level
  • Strong airflow of 38 cfm for heat removal
  • Hydraulic bearing rated for 20000 hours life
  • RGB LED lighting with 5V addressable control
  • 120 mm frame fits standard case mounts

Specifikacije

Za ovaj artikl još nisu objavljene specifikacije.

Pitanja o ovom artiklu

Will the 12 V fan header on my older motherboard power the 1500 RPM fan and 5 V RGB header drive the LED?

Yes, the fan runs on a 12 V four-pin header at 1500 RPM while the RGB LEDs draw power from a separate 5 V four-pin header, both using the included six-pin adapter.

How can I confirm the fan is spinning at the rated 1500 RPM and staying near 16 dBA after installation?

Check the RPM reading in BIOS or fan-control software — it should show roughly 1500 RPM — and listen for a quiet 16 dBA hum; the hydraulic bearing is rated for 20000 hours of operation.

Does the single-fan pack include mounting screws and the six-pin to dual-header adapter, or must I buy them separately?

The box contains one 120 mm RGB fan, four mounting screws and the six-pin connector that splits to a four-pin fan header and a four-pin 5 V RGB header; nothing else is required.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.