Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Square black 80mm frame USB fan with long cable

SXDOOL

SXDOOL PLA08010S05L 80mm 5V 0.15A USB case fan

SKU CH-05AR-PP6BV MPN PLA08010S05L

80 mm sleeve-bearing fan runs on 5 V USB power with an extra-long cable

  • Fan Size80mm
  • Power ConnectorUSB 1.1/2.0
  • USB powered convenience plugs into any 5V port
  • 80mm frame fits tight case spaces
  • 15A draw keeps power use minimal
  • sleeve bearing runs quietly at low speed
  • extra long cable reaches awkward motherboard headers

Compact USB-powered 80 mm case fan

The SXDOOL PLA08010S05L is an 80 mm square frame fan that draws power from a standard USB 1.1 or 2.0 port. It suits builders who need a low-voltage airflow boost for tight chassis spaces or peripheral cooling without tapping the motherboard fan header.

Sleeve bearing thermals and 5 V draw

A sleeve bearing keeps acoustic output low during typical operation while the 5 V 0.15 A rating limits power draw to a fraction of a watt. The modified USB connector includes an extra-long lead for flexible routing inside small enclosures.

USB 1.1/2.0 power connector decides fit

The sole power interface is a USB 1.1/2.0 plug, so the fan only works where a spare USB port is available. Builds that rely exclusively on 3-pin, 4-pin or Molex headers cannot use this unit without an adapter.

Privalumai

  • USB powered convenience plugs into any 5V port
  • 80mm frame fits tight case spaces
  • 15A draw keeps power use minimal
  • sleeve bearing runs quietly at low speed
  • extra long cable reaches awkward motherboard headers

Specifikacijos

Fan Size80mm
Power ConnectorUSB 1.1/2.0

Klausimai apie šią prekę

How do I install the 80mm fan using the modified USB interface with the extra-long line?

Plug the USB 1.1/2.0 connector into any powered USB port, then secure the 80*80*10mm frame with four screws through the corner holes; the extra-long cable lets you route behind the motherboard tray so the plug reaches without tension.

What maintenance will the sleeve bearing need later?

Sleeve bearings run dry over time; after a year or two of continuous use expect rising noise, then replace the whole 5V 0.15A unit — no relube port exists.

What limit appears first during sustained 5V 0.15A operation?

The sleeve bearing’s heat tolerance is the first ceiling; prolonged load raises internal friction until RPM drops or the fan stalls.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.