Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Square black 80mm frame USB fan with long cable

SXDOOL

SXDOOL PLA08010S05L 80mm 5V 0.15A USB case fan

SKU CH-05AR-PP6BV MPN PLA08010S05L

80 mm sleeve-bearing fan runs on 5 V USB power with an extra-long cable

  • Fan Size80mm
  • Power ConnectorUSB 1.1/2.0
  • USB powered convenience plugs into any 5V port
  • 80mm frame fits tight case spaces
  • 15A draw keeps power use minimal
  • sleeve bearing runs quietly at low speed
  • extra long cable reaches awkward motherboard headers

Compact USB-powered 80 mm case fan

The SXDOOL PLA08010S05L is an 80 mm square frame fan that draws power from a standard USB 1.1 or 2.0 port. It suits builders who need a low-voltage airflow boost for tight chassis spaces or peripheral cooling without tapping the motherboard fan header.

Sleeve bearing thermals and 5 V draw

A sleeve bearing keeps acoustic output low during typical operation while the 5 V 0.15 A rating limits power draw to a fraction of a watt. The modified USB connector includes an extra-long lead for flexible routing inside small enclosures.

USB 1.1/2.0 power connector decides fit

The sole power interface is a USB 1.1/2.0 plug, so the fan only works where a spare USB port is available. Builds that rely exclusively on 3-pin, 4-pin or Molex headers cannot use this unit without an adapter.

Poudarki

  • USB powered convenience plugs into any 5V port
  • 80mm frame fits tight case spaces
  • 15A draw keeps power use minimal
  • sleeve bearing runs quietly at low speed
  • extra long cable reaches awkward motherboard headers

Specifikacije

Fan Size80mm
Power ConnectorUSB 1.1/2.0

Vprašanja o tem izdelku

How do I install the 80mm fan using the modified USB interface with the extra-long line?

Plug the USB 1.1/2.0 connector into any powered USB port, then secure the 80*80*10mm frame with four screws through the corner holes; the extra-long cable lets you route behind the motherboard tray so the plug reaches without tension.

What maintenance will the sleeve bearing need later?

Sleeve bearings run dry over time; after a year or two of continuous use expect rising noise, then replace the whole 5V 0.15A unit — no relube port exists.

What limit appears first during sustained 5V 0.15A operation?

The sleeve bearing’s heat tolerance is the first ceiling; prolonged load raises internal friction until RPM drops or the fan stalls.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.