Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Square black 80mm frame USB fan with long cable

SXDOOL

SXDOOL PLA08010S05L 80mm 5V 0.15A USB case fan

SKU CH-05AR-PP6BV MPN PLA08010S05L

80 mm sleeve-bearing fan runs on 5 V USB power with an extra-long cable

  • Fan Size80mm
  • Power ConnectorUSB 1.1/2.0
  • USB powered convenience plugs into any 5V port
  • 80mm frame fits tight case spaces
  • 15A draw keeps power use minimal
  • sleeve bearing runs quietly at low speed
  • extra long cable reaches awkward motherboard headers

Compact USB-powered 80 mm case fan

The SXDOOL PLA08010S05L is an 80 mm square frame fan that draws power from a standard USB 1.1 or 2.0 port. It suits builders who need a low-voltage airflow boost for tight chassis spaces or peripheral cooling without tapping the motherboard fan header.

Sleeve bearing thermals and 5 V draw

A sleeve bearing keeps acoustic output low during typical operation while the 5 V 0.15 A rating limits power draw to a fraction of a watt. The modified USB connector includes an extra-long lead for flexible routing inside small enclosures.

USB 1.1/2.0 power connector decides fit

The sole power interface is a USB 1.1/2.0 plug, so the fan only works where a spare USB port is available. Builds that rely exclusively on 3-pin, 4-pin or Molex headers cannot use this unit without an adapter.

Priekšrocības

  • USB powered convenience plugs into any 5V port
  • 80mm frame fits tight case spaces
  • 15A draw keeps power use minimal
  • sleeve bearing runs quietly at low speed
  • extra long cable reaches awkward motherboard headers

Specifikācijas

Fan Size80mm
Power ConnectorUSB 1.1/2.0

Jautājumi par šo preci

How do I install the 80mm fan using the modified USB interface with the extra-long line?

Plug the USB 1.1/2.0 connector into any powered USB port, then secure the 80*80*10mm frame with four screws through the corner holes; the extra-long cable lets you route behind the motherboard tray so the plug reaches without tension.

What maintenance will the sleeve bearing need later?

Sleeve bearings run dry over time; after a year or two of continuous use expect rising noise, then replace the whole 5V 0.15A unit — no relube port exists.

What limit appears first during sustained 5V 0.15A operation?

The sleeve bearing’s heat tolerance is the first ceiling; prolonged load raises internal friction until RPM drops or the fan stalls.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.