Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Standalone duplicator unit with open slots for M.2 and SATA drives

Systor

Systor 1-to-3 SATA NVMe Duplicator 9GB/min SYSNVME-XW203

SKU CH-7GC4-VJMGB

Standalone duplicator copies one SATA or NVMe source to three targets at 9 GB/min and sanitises drives with Quick, Full, Secure, DoD or DoD+Compare erase modes

  • Target1 to 3
  • Data Transfer Rate9GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 03

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Standalone operation needs no host PC
  • Copies up to three targets simultaneously
  • Transfers data at up to 9 GB/min
  • Supports SATA and NVMe drives with flexible cross-interface cloning
  • Sanitises with NIST 800-88 and DoD 5220.22-M compliant erase modes

Target Drives and Use Cases

The Systor SYSNVME-XW203 duplicates one source drive onto up to three targets at up to 9GB per minute. It accepts M.2 NVMe, M.2 SATA, 2.5 inch and 3.5 inch SATA SSDs or HDDs up to 18TB and handles MBR or GPT partitions. The standalone design means no host computer or software is needed, making it suited for IT departments, forensic labs and duplication services that need to clone or sanitise mixed drive types quickly.

Upgrade Path and Value

It replaces slower single-target copiers and PC-based imaging workflows that require adapter cables and OS boot time. The jump is worth it when you regularly move data between NVMe and SATA form factors or must meet NIST 800-88 and DoD 5220.22-M sanitisation standards without tying up a workstation. Buyers who only clone identical SATA drives once a month will not see the benefit.

Installation and Common Issues

Operation is push-button: insert source and target drives, select copy or erase mode, then start. No drivers or network setup are required. The most frequent issue is a speed drop when target drives have lower write throughput than the source. Mismatched partition tables can also cause incomplete clones, so verify MBR or GPT alignment before starting a batch.

Privalumai

  • Standalone operation needs no host PC
  • Copies up to three targets simultaneously
  • Transfers data at up to 9 GB/min
  • Supports SATA and NVMe drives with flexible cross-interface cloning
  • Sanitises with NIST 800-88 and DoD 5220.22-M compliant erase modes

Specifikacijos

Target1 to 3
Data Transfer Rate9GB/min
Operating TypeStandalone

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What drive sizes and interfaces fit the Systor SYSNVME-XW203 duplicator?

The open platform accepts M.2 NVMe (M key and B+M key), SATA Express M.2, PCIe SSD, and 2.5 or 3.5 inch SATA HDD/SSD up to 18TB; mSATA and CFast need separate adapters.

How do I start a copy job and what step is often missed?

Insert source and up to three target drives, select copy mode, then press the start button; the commonly missed step is verifying each target shows a solid green LED before walking away.

Which erase modes are built in for later drive sanitisation?

Quick Erase, Full Erase, Secure Erase (NIST 800-88), DoD Erase (DoD 5220.22-M), and DoD Erase + Compare are all available without a PC.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.