暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Standalone duplicator unit with open slots for M.2 and SATA drives

Systor

Systor 1-to-3 SATA NVMe Duplicator 9GB/min SYSNVME-XW203

SKU CH-7GC4-VJMGB

Standalone duplicator copies one SATA or NVMe source to three targets at 9 GB/min and sanitises drives with Quick, Full, Secure, DoD or DoD+Compare erase modes

  • Target1 to 3
  • Data Transfer Rate9GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 03

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Standalone operation needs no host PC
  • Copies up to three targets simultaneously
  • Transfers data at up to 9 GB/min
  • Supports SATA and NVMe drives with flexible cross-interface cloning
  • Sanitises with NIST 800-88 and DoD 5220.22-M compliant erase modes

Target Drives and Use Cases

The Systor SYSNVME-XW203 duplicates one source drive onto up to three targets at up to 9GB per minute. It accepts M.2 NVMe, M.2 SATA, 2.5 inch and 3.5 inch SATA SSDs or HDDs up to 18TB and handles MBR or GPT partitions. The standalone design means no host computer or software is needed, making it suited for IT departments, forensic labs and duplication services that need to clone or sanitise mixed drive types quickly.

Upgrade Path and Value

It replaces slower single-target copiers and PC-based imaging workflows that require adapter cables and OS boot time. The jump is worth it when you regularly move data between NVMe and SATA form factors or must meet NIST 800-88 and DoD 5220.22-M sanitisation standards without tying up a workstation. Buyers who only clone identical SATA drives once a month will not see the benefit.

Installation and Common Issues

Operation is push-button: insert source and target drives, select copy or erase mode, then start. No drivers or network setup are required. The most frequent issue is a speed drop when target drives have lower write throughput than the source. Mismatched partition tables can also cause incomplete clones, so verify MBR or GPT alignment before starting a batch.

特長

  • Standalone operation needs no host PC
  • Copies up to three targets simultaneously
  • Transfers data at up to 9 GB/min
  • Supports SATA and NVMe drives with flexible cross-interface cloning
  • Sanitises with NIST 800-88 and DoD 5220.22-M compliant erase modes

仕様

Target1 to 3
Data Transfer Rate9GB/min
Operating TypeStandalone

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What drive sizes and interfaces fit the Systor SYSNVME-XW203 duplicator?

The open platform accepts M.2 NVMe (M key and B+M key), SATA Express M.2, PCIe SSD, and 2.5 or 3.5 inch SATA HDD/SSD up to 18TB; mSATA and CFast need separate adapters.

How do I start a copy job and what step is often missed?

Insert source and up to three target drives, select copy mode, then press the start button; the commonly missed step is verifying each target shows a solid green LED before walking away.

Which erase modes are built in for later drive sanitisation?

Quick Erase, Full Erase, Secure Erase (NIST 800-88), DoD Erase (DoD 5220.22-M), and DoD Erase + Compare are all available without a PC.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。