暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone duplicator unit with four drive slots and front control panel

Systor

Systor 1 to 3 SATA NVMe Duplicator 18GB/min Standalone SYSNVME-XW303

SKU CH-THGW-3T795

Standalone duplicator copies or sanitises one source to three SATA or NVMe targets at up to 18 GB/min

  • Target1 to 3
  • Data Transfer Rate18GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 03

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Standalone operation — no computer or software needed
  • Copies up to three drives at 18 GB per minute
  • Supports SATA and NVMe drives including 2.5 and 3.5 inch formats
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • Open platform design fits M.2, PCIe and SATA devices

Standalone NVMe and SATA Duplicator

The Systor SYSNVME-XW303 is a standalone duplicator that copies or sanitises one source drive onto up to three targets. It accepts NVMe M.2 and SATA SSDs or HDDs in 2.5 and 3.5 inch form factors without requiring a host computer. Transfer rates reach 18GB per minute.

IT teams and forensic units needing multi-drive

Organisations that must duplicate or wipe several drives at once will benefit from the three-target capacity and support for both NVMe and SATA media. Buyers who need more than three simultaneous targets or who rely on unsupported interfaces such as USB cannot use this unit.

18GB per minute maximum copy speed

The quoted 18GB/min throughput determines how quickly large drives can be cloned or erased. Actual performance depends on the read and write capabilities of the specific source and target drives installed.

特長

  • Standalone operation — no computer or software needed
  • Copies up to three drives at 18 GB per minute
  • Supports SATA and NVMe drives including 2.5 and 3.5 inch formats
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • Open platform design fits M.2, PCIe and SATA devices

仕様

Target1 to 3
Data Transfer Rate18GB/min
Operating TypeStandalone

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the SYSNVME-XW303 draw when copying to three targets continuously?

The duplicator runs standalone without a host PC, so its power draw depends on the drives installed; no host software or computer is needed during long copy sessions.

Which drive interfaces must I already have to use the duplicator without extra adapters?

The unit accepts M.2 NVMe, M.2 SATA, and 2.5 or 3.5 inch SATA drives directly; mSATA or CFAST require separate adapters.

Will the duplicator copy from an older 2.5-inch SATA SSD to a new M.2 NVMe drive?

Yes, it automatically detects NVMe or SATA signals and supports cross-interface duplication such as SATA SSD to M.2 NVMe.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。