Systor
Systor 1 to 3 SATA NVMe Duplicator 18GB/min Standalone SYSNVME-XW303
Standalone duplicator copies or sanitises one source to three SATA or NVMe targets at up to 18 GB/min
- Target1 to 3
- Data Transfer Rate18GB/min
- Operating TypeStandalone
DATA TRANSFER RATE 18.0GB/min [300MB/sec]
- 9.0GB/min [150MB/sec]
- 12.0GB/min [200MB/sec]
- 18.0GB/min [300MB/sec]
- 24.0GB/min [400MB/sec]
- Standalone operation — no computer or software needed
- Copies up to three drives at 18 GB per minute
- Supports SATA and NVMe drives including 2.5 and 3.5 inch formats
- Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
- Open platform design fits M.2, PCIe and SATA devices
Standalone NVMe and SATA Duplicator
The Systor SYSNVME-XW303 is a standalone duplicator that copies or sanitises one source drive onto up to three targets. It accepts NVMe M.2 and SATA SSDs or HDDs in 2.5 and 3.5 inch form factors without requiring a host computer. Transfer rates reach 18GB per minute.
IT teams and forensic units needing multi-drive
Organisations that must duplicate or wipe several drives at once will benefit from the three-target capacity and support for both NVMe and SATA media. Buyers who need more than three simultaneous targets or who rely on unsupported interfaces such as USB cannot use this unit.
18GB per minute maximum copy speed
The quoted 18GB/min throughput determines how quickly large drives can be cloned or erased. Actual performance depends on the read and write capabilities of the specific source and target drives installed.
Põhijooned
- Standalone operation — no computer or software needed
- Copies up to three drives at 18 GB per minute
- Supports SATA and NVMe drives including 2.5 and 3.5 inch formats
- Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
- Open platform design fits M.2, PCIe and SATA devices
Tehnilised andmed
| Target | 1 to 3 |
|---|---|
| Data Transfer Rate | 18GB/min |
| Operating Type | Standalone |
Selle mudeli teised versioonid
5 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Systor
Systor 1-to-3 SATA NVMe Duplicator 9GB/min SYSNVME-XW203
- 1 to 3
- 9GB/min
3 356,99 $
0.04132341BTC
Laos
Systor
Systor SYSNVME-M2205 1 to 5 SATA NVMe Duplicator 9GB/min
- 1 to 5
- 9GB/min
3 585,99 $
0.04414232BTC
Laos
Systor
Systor 1-to-7 SATA NVMe Duplicator 9GB/min SYSNVME-XW207
- 1 to 7
- 9GB/min
5 926,99 $
0.07295924BTC
Laos
Küsimused selle toote kohta
How much power does the SYSNVME-XW303 draw when copying to three targets continuously?
The duplicator runs standalone without a host PC, so its power draw depends on the drives installed; no host software or computer is needed during long copy sessions.
Which drive interfaces must I already have to use the duplicator without extra adapters?
The unit accepts M.2 NVMe, M.2 SATA, and 2.5 or 3.5 inch SATA drives directly; mSATA or CFAST require separate adapters.
Will the duplicator copy from an older 2.5-inch SATA SSD to a new M.2 NVMe drive?
Yes, it automatically detects NVMe or SATA signals and supports cross-interface duplication such as SATA SSD to M.2 NVMe.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
