我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone duplicator unit with four drive slots and front control panel

Systor

Systor 1 to 3 SATA NVMe Duplicator 18GB/min Standalone SYSNVME-XW303

SKU CH-THGW-3T795

Standalone duplicator copies or sanitises one source to three SATA or NVMe targets at up to 18 GB/min

  • Target1 to 3
  • Data Transfer Rate18GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 03

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Standalone operation — no computer or software needed
  • Copies up to three drives at 18 GB per minute
  • Supports SATA and NVMe drives including 2.5 and 3.5 inch formats
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • Open platform design fits M.2, PCIe and SATA devices

Standalone NVMe and SATA Duplicator

The Systor SYSNVME-XW303 is a standalone duplicator that copies or sanitises one source drive onto up to three targets. It accepts NVMe M.2 and SATA SSDs or HDDs in 2.5 and 3.5 inch form factors without requiring a host computer. Transfer rates reach 18GB per minute.

IT teams and forensic units needing multi-drive

Organisations that must duplicate or wipe several drives at once will benefit from the three-target capacity and support for both NVMe and SATA media. Buyers who need more than three simultaneous targets or who rely on unsupported interfaces such as USB cannot use this unit.

18GB per minute maximum copy speed

The quoted 18GB/min throughput determines how quickly large drives can be cloned or erased. Actual performance depends on the read and write capabilities of the specific source and target drives installed.

商品特色

  • Standalone operation — no computer or software needed
  • Copies up to three drives at 18 GB per minute
  • Supports SATA and NVMe drives including 2.5 and 3.5 inch formats
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • Open platform design fits M.2, PCIe and SATA devices

商品規格

Target1 to 3
Data Transfer Rate18GB/min
Operating TypeStandalone

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much power does the SYSNVME-XW303 draw when copying to three targets continuously?

The duplicator runs standalone without a host PC, so its power draw depends on the drives installed; no host software or computer is needed during long copy sessions.

Which drive interfaces must I already have to use the duplicator without extra adapters?

The unit accepts M.2 NVMe, M.2 SATA, and 2.5 or 3.5 inch SATA drives directly; mSATA or CFAST require separate adapters.

Will the duplicator copy from an older 2.5-inch SATA SSD to a new M.2 NVMe drive?

Yes, it automatically detects NVMe or SATA signals and supports cross-interface duplication such as SATA SSD to M.2 NVMe.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。