我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular standalone duplicator with five M.2 slots and LCD display

Systor

Systor SYSNVME-M2205 1 to 5 SATA NVMe Duplicator 9GB/min

SKU CH-32V8-G1AGP

Standalone duplicator copies or sanitises up to five SATA and NVMe M.2 drives at 9 GB/min with a 20 x 2 LCD

  • Target1 to 5
  • Data Transfer Rate9GB/min
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 05

  • 1 to 01
  • 1 to 03
  • 1 to 05
  • 1 to 07
  • 1 to 10
  • 1 to 11
  • 1 to 23

被劃上刪除線的選項確實存在，但本站並無供貨。

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

被劃上刪除線的選項確實存在，但本站並無供貨。

  • Standalone operation with no PC required
  • Copies up to five drives at 9GB/min
  • Supports NVMe and SATA M.2 form factors
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • 20×2 LCD for status and menu navigation

Standalone M.2 NVMe duplicator for five targets

This unit copies or erases up to five M.2 drives at once without a host computer. It handles NVMe PCIe and SATA M.2 media in sizes from 2230 to 22110 automatically. Transfer rates reach 9 GB per minute depending on the source and target drive speeds. A 20 by 2 character LCD shows progress and menus during operation.

Open-platform tray design accepts mixed interfaces

Each slot detects NVMe or SATA signalling so you can duplicate across different drive types in the same session. The trays support M key and B+M key modules plus PCIe SSD form factors up to 18 TB capacity. No adapters or caddies are required for the listed M.2 lengths. Standalone operation means no driver installation or host downtime.

Three erase modes meet sanitisation standards

Quick Erase, Full Erase and Secure Erase follow NIST 800-88 guidance while DoD Erase and DoD Erase + Compare satisfy 5220.22-M requirements. The copier handles proprietary or unknown partition formats alongside FAT, exFAT, NTFS, ext2 through ext4, HFS, HFS+ and HFSX. Buyers needing network-attached or scripted batch control will need a different solution.

商品特色

  • Standalone operation with no PC required
  • Copies up to five drives at 9GB/min
  • Supports NVMe and SATA M.2 form factors
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • 20×2 LCD for status and menu navigation

商品規格

Target1 to 5
Data Transfer Rate9GB/min
Display20 x 2 LCD
Operating TypeStandalone

其他版本

同系列還有 1 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What interface standard does the duplicator use and what practical copy speed does it cap at?

It uses SATA and NVMe interfaces and caps copy speed at 9GB per minute.

What physical drive sizes and key types must the target M.2 drives match to fit the slots?

It accepts M.2 sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 22110 and 3080 with M key or B+M key.

How do you start a copy job on this standalone unit and which step do users often miss?

Insert the source and target drives, select copy mode on the 20 x 2 LCD, then press the start button; users often forget to confirm the erase method before copying.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。