Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Rectangular standalone duplicator with five M.2 slots and LCD display

Systor

Systor SYSNVME-M2205 1 to 5 SATA NVMe Duplicator 9GB/min

SKU CH-32V8-G1AGP

Standalone duplicator copies or sanitises up to five SATA and NVMe M.2 drives at 9 GB/min with a 20 x 2 LCD

  • Target1 to 5
  • Data Transfer Rate9GB/min
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 05

  • 1 to 01
  • 1 to 03
  • 1 to 05
  • 1 to 07
  • 1 to 10
  • 1 to 11
  • 1 to 23

Зачертаните версии съществуват, но не се предлагат тук.

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

Зачертаните версии съществуват, но не се предлагат тук.

  • Standalone operation with no PC required
  • Copies up to five drives at 9GB/min
  • Supports NVMe and SATA M.2 form factors
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • 20×2 LCD for status and menu navigation

Standalone M.2 NVMe duplicator for five targets

This unit copies or erases up to five M.2 drives at once without a host computer. It handles NVMe PCIe and SATA M.2 media in sizes from 2230 to 22110 automatically. Transfer rates reach 9 GB per minute depending on the source and target drive speeds. A 20 by 2 character LCD shows progress and menus during operation.

Open-platform tray design accepts mixed interfaces

Each slot detects NVMe or SATA signalling so you can duplicate across different drive types in the same session. The trays support M key and B+M key modules plus PCIe SSD form factors up to 18 TB capacity. No adapters or caddies are required for the listed M.2 lengths. Standalone operation means no driver installation or host downtime.

Three erase modes meet sanitisation standards

Quick Erase, Full Erase and Secure Erase follow NIST 800-88 guidance while DoD Erase and DoD Erase + Compare satisfy 5220.22-M requirements. The copier handles proprietary or unknown partition formats alongside FAT, exFAT, NTFS, ext2 through ext4, HFS, HFS+ and HFSX. Buyers needing network-attached or scripted batch control will need a different solution.

Акценти

  • Standalone operation with no PC required
  • Copies up to five drives at 9GB/min
  • Supports NVMe and SATA M.2 form factors
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • 20×2 LCD for status and menu navigation

Спецификации

Target1 to 5
Data Transfer Rate9GB/min
Display20 x 2 LCD
Operating TypeStandalone

Други версии на този модел

1 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

What interface standard does the duplicator use and what practical copy speed does it cap at?

It uses SATA and NVMe interfaces and caps copy speed at 9GB per minute.

What physical drive sizes and key types must the target M.2 drives match to fit the slots?

It accepts M.2 sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 22110 and 3080 with M key or B+M key.

How do you start a copy job on this standalone unit and which step do users often miss?

Insert the source and target drives, select copy mode on the 20 x 2 LCD, then press the start button; users often forget to confirm the erase method before copying.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.