Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular standalone duplicator with five M.2 slots and LCD display

Systor

Systor SYSNVME-M2205 1 to 5 SATA NVMe Duplicator 9GB/min

SKU CH-32V8-G1AGP

Standalone duplicator copies or sanitises up to five SATA and NVMe M.2 drives at 9 GB/min with a 20 x 2 LCD

  • Target1 to 5
  • Data Transfer Rate9GB/min
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 05

  • 1 to 01
  • 1 to 03
  • 1 to 05
  • 1 to 07
  • 1 to 10
  • 1 to 11
  • 1 to 23

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • Standalone operation with no PC required
  • Copies up to five drives at 9GB/min
  • Supports NVMe and SATA M.2 form factors
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • 20×2 LCD for status and menu navigation

Standalone M.2 NVMe duplicator for five targets

This unit copies or erases up to five M.2 drives at once without a host computer. It handles NVMe PCIe and SATA M.2 media in sizes from 2230 to 22110 automatically. Transfer rates reach 9 GB per minute depending on the source and target drive speeds. A 20 by 2 character LCD shows progress and menus during operation.

Open-platform tray design accepts mixed interfaces

Each slot detects NVMe or SATA signalling so you can duplicate across different drive types in the same session. The trays support M key and B+M key modules plus PCIe SSD form factors up to 18 TB capacity. No adapters or caddies are required for the listed M.2 lengths. Standalone operation means no driver installation or host downtime.

Three erase modes meet sanitisation standards

Quick Erase, Full Erase and Secure Erase follow NIST 800-88 guidance while DoD Erase and DoD Erase + Compare satisfy 5220.22-M requirements. The copier handles proprietary or unknown partition formats alongside FAT, exFAT, NTFS, ext2 through ext4, HFS, HFS+ and HFSX. Buyers needing network-attached or scripted batch control will need a different solution.

Privalumai

  • Standalone operation with no PC required
  • Copies up to five drives at 9GB/min
  • Supports NVMe and SATA M.2 form factors
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • 20×2 LCD for status and menu navigation

Specifikacijos

Target1 to 5
Data Transfer Rate9GB/min
Display20 x 2 LCD
Operating TypeStandalone

Kiti šio modelio variantai

Dar 1 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What interface standard does the duplicator use and what practical copy speed does it cap at?

It uses SATA and NVMe interfaces and caps copy speed at 9GB per minute.

What physical drive sizes and key types must the target M.2 drives match to fit the slots?

It accepts M.2 sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 22110 and 3080 with M key or B+M key.

How do you start a copy job on this standalone unit and which step do users often miss?

Insert the source and target drives, select copy mode on the 20 x 2 LCD, then press the start button; users often forget to confirm the erase method before copying.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.