Systor
Systor SYSNVME-M2205 1 to 5 SATA NVMe Duplicator 9GB/min
Standalone duplicator copies or sanitises up to five SATA and NVMe M.2 drives at 9 GB/min with a 20 x 2 LCD
- Target1 to 5
- Data Transfer Rate9GB/min
- Display20 x 2 LCD
- Operating TypeStandalone
TARGET SIZE 1 to 05
- 1 to 01
- 1 to 03
- 1 to 05
- 1 to 07
- 1 to 10
- 1 to 11
- 1 to 23
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
DATA TRANSFER RATE 9.0GB/min [150MB/sec]
- 9.0GB/min [150MB/sec]
- 12.0GB/min [200MB/sec]
- 18.0GB/min [300MB/sec]
- 24.0GB/min [400MB/sec]
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
- Standalone operation with no PC required
- Copies up to five drives at 9GB/min
- Supports NVMe and SATA M.2 form factors
- Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
- 20×2 LCD for status and menu navigation
Standalone M.2 NVMe duplicator for five targets
This unit copies or erases up to five M.2 drives at once without a host computer. It handles NVMe PCIe and SATA M.2 media in sizes from 2230 to 22110 automatically. Transfer rates reach 9 GB per minute depending on the source and target drive speeds. A 20 by 2 character LCD shows progress and menus during operation.
Open-platform tray design accepts mixed interfaces
Each slot detects NVMe or SATA signalling so you can duplicate across different drive types in the same session. The trays support M key and B+M key modules plus PCIe SSD form factors up to 18 TB capacity. No adapters or caddies are required for the listed M.2 lengths. Standalone operation means no driver installation or host downtime.
Three erase modes meet sanitisation standards
Quick Erase, Full Erase and Secure Erase follow NIST 800-88 guidance while DoD Erase and DoD Erase + Compare satisfy 5220.22-M requirements. The copier handles proprietary or unknown partition formats alongside FAT, exFAT, NTFS, ext2 through ext4, HFS, HFS+ and HFSX. Buyers needing network-attached or scripted batch control will need a different solution.
Kohokohdat
- Standalone operation with no PC required
- Copies up to five drives at 9GB/min
- Supports NVMe and SATA M.2 form factors
- Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
- 20×2 LCD for status and menu navigation
Tekniset tiedot
| Target | 1 to 5 |
|---|---|
| Data Transfer Rate | 9GB/min |
| Display | 20 x 2 LCD |
| Operating Type | Standalone |
Tämän mallin muut versiot
1 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Kysymyksiä tästä tuotteesta
What interface standard does the duplicator use and what practical copy speed does it cap at?
It uses SATA and NVMe interfaces and caps copy speed at 9GB per minute.
What physical drive sizes and key types must the target M.2 drives match to fit the slots?
It accepts M.2 sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 22110 and 3080 with M key or B+M key.
How do you start a copy job on this standalone unit and which step do users often miss?
Insert the source and target drives, select copy mode on the 20 x 2 LCD, then press the start button; users often forget to confirm the erase method before copying.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Vszerda
Vszerda External CD DVD Drive USB 3.0 USB-C Duplicator with Hub Card Reader
54,99 $
0.00067503BTC
Varastossa
