저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black standalone duplicator unit with four drive slots and front control panel

Systor

Systor 1 to 3 SATA NVMe Duplicator 18GB/min Standalone SYSNVME-XW303

SKU CH-THGW-3T795

Standalone duplicator copies or sanitises one source to three SATA or NVMe targets at up to 18 GB/min

  • Target1 to 3
  • Data Transfer Rate18GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 03

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Standalone operation — no computer or software needed
  • Copies up to three drives at 18 GB per minute
  • Supports SATA and NVMe drives including 2.5 and 3.5 inch formats
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • Open platform design fits M.2, PCIe and SATA devices

Standalone NVMe and SATA Duplicator

The Systor SYSNVME-XW303 is a standalone duplicator that copies or sanitises one source drive onto up to three targets. It accepts NVMe M.2 and SATA SSDs or HDDs in 2.5 and 3.5 inch form factors without requiring a host computer. Transfer rates reach 18GB per minute.

IT teams and forensic units needing multi-drive

Organisations that must duplicate or wipe several drives at once will benefit from the three-target capacity and support for both NVMe and SATA media. Buyers who need more than three simultaneous targets or who rely on unsupported interfaces such as USB cannot use this unit.

18GB per minute maximum copy speed

The quoted 18GB/min throughput determines how quickly large drives can be cloned or erased. Actual performance depends on the read and write capabilities of the specific source and target drives installed.

주요 특징

  • Standalone operation — no computer or software needed
  • Copies up to three drives at 18 GB per minute
  • Supports SATA and NVMe drives including 2.5 and 3.5 inch formats
  • Multiple sanitise modes including NIST 800-88 and DoD 5220.22-M
  • Open platform design fits M.2, PCIe and SATA devices

사양

Target1 to 3
Data Transfer Rate18GB/min
Operating TypeStandalone

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How much power does the SYSNVME-XW303 draw when copying to three targets continuously?

The duplicator runs standalone without a host PC, so its power draw depends on the drives installed; no host software or computer is needed during long copy sessions.

Which drive interfaces must I already have to use the duplicator without extra adapters?

The unit accepts M.2 NVMe, M.2 SATA, and 2.5 or 3.5 inch SATA drives directly; mSATA or CFAST require separate adapters.

Will the duplicator copy from an older 2.5-inch SATA SSD to a new M.2 NVMe drive?

Yes, it automatically detects NVMe or SATA signals and supports cross-interface duplication such as SATA SSD to M.2 NVMe.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.