Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Three white 120mm ARGB case fans with luminous frames and MagForce 2.0 connectors

Thermaltake

Thermaltake CL-F211-PL12SW-A 120mm ARGB case fan 3-pack white

SKU CH-EZCG-Y3GQQ MPN CL-F211-PL12SW-A

Three 120 mm hydraulic-bearing fans deliver 59.34 CFM airflow at up to 2000 RPM with 2.86 mm-H₂O static pressure and 5 V ARGB sync

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPMPWM 500 ~ 2000 R.P.M
  • MagForce 2.0 doubles pogo-pin contact area for stable ARGB sync
  • Luminous side frames add diffused glow beyond front and rear lighting
  • Hydraulic bearing runs at 25.7 dB-A for quiet operation up to 2000 RPM
  • 34 CFM airflow and 2.86 mm-H2O pressure suit radiator and case use
  • Nine LCP blades cut vibration while maintaining high static pressure and flow

Three-fan ARGB kit

This three-pack of 120 mm case fans adds addressable RGB lighting and PWM speed control to a build. Each unit spins from 500 to 2000 RPM and connects via a 2510 4-pin power header plus a 5 V 3-pin ARGB header for motherboard sync.

Sustained airflow and pressure

At full speed a single fan delivers 59.34 CFM of airflow and 2.86 mm-H₂O of static pressure while producing 25.7 dB-A of noise. The hydraulic bearing and nine liquid crystal polymer blades are designed to maintain those figures over long sessions without vibration spikes.

MagForce 2.0 mounting and white frame

MagForce 2.0 uses enlarged pogo-pin contact pads to keep the fans firmly aligned on radiators or case mounts. The white finish and luminous side frames give a diffused glow from every angle, and the 25 mm thickness fits standard 120 mm mounting points.

Privalumai

  • MagForce 2.0 doubles pogo-pin contact area for stable ARGB sync
  • Luminous side frames add diffused glow beyond front and rear lighting
  • Hydraulic bearing runs at 25.7 dB-A for quiet operation up to 2000 RPM
  • 34 CFM airflow and 2.86 mm-H2O pressure suit radiator and case use
  • Nine LCP blades cut vibration while maintaining high static pressure and flow

Specifikacijos

BrandThermaltake
ModelCL-F211-PL12SW-A
Fan Counts3 Fans
TypeCase Fan
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500 ~ 2000 R.P.M
Air Flow59.34 CFM (one fan)
Noise Level25.7 dB-A (one fan)
Power Connector2510-4 Pin
5V ARGB header-3Pin
ColorWhite
LEDARGB
Siuntos svoris0.89 kg
Pakuotės dydis155 × 130 × 89 mm

Klausimai apie šią prekę

How loud are the three fans when running at full speed all day?

Each fan reaches 25.7 dB-A at 2000 RPM, so the trio stays at that level per unit under sustained load.

Does my motherboard need a specific header for the 5V ARGB lighting?

Yes, a 5V 3-pin ARGB header is required to control the lighting via motherboard software.

Will the 2.86 mm-H2O static pressure work with an older radiator that has dense fins?

The 2.86 mm-H2O rating is designed for both air and water cooling, providing enough force for restrictive radiators.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.