暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three white 120mm ARGB case fans with luminous frames and MagForce 2.0 connectors

Thermaltake

Thermaltake CL-F211-PL12SW-A 120mm ARGB case fan 3-pack white

SKU CH-EZCG-Y3GQQ MPN CL-F211-PL12SW-A

Three 120 mm hydraulic-bearing fans deliver 59.34 CFM airflow at up to 2000 RPM with 2.86 mm-H₂O static pressure and 5 V ARGB sync

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPMPWM 500 ~ 2000 R.P.M
  • MagForce 2.0 doubles pogo-pin contact area for stable ARGB sync
  • Luminous side frames add diffused glow beyond front and rear lighting
  • Hydraulic bearing runs at 25.7 dB-A for quiet operation up to 2000 RPM
  • 34 CFM airflow and 2.86 mm-H2O pressure suit radiator and case use
  • Nine LCP blades cut vibration while maintaining high static pressure and flow

Three-fan ARGB kit

This three-pack of 120 mm case fans adds addressable RGB lighting and PWM speed control to a build. Each unit spins from 500 to 2000 RPM and connects via a 2510 4-pin power header plus a 5 V 3-pin ARGB header for motherboard sync.

Sustained airflow and pressure

At full speed a single fan delivers 59.34 CFM of airflow and 2.86 mm-H₂O of static pressure while producing 25.7 dB-A of noise. The hydraulic bearing and nine liquid crystal polymer blades are designed to maintain those figures over long sessions without vibration spikes.

MagForce 2.0 mounting and white frame

MagForce 2.0 uses enlarged pogo-pin contact pads to keep the fans firmly aligned on radiators or case mounts. The white finish and luminous side frames give a diffused glow from every angle, and the 25 mm thickness fits standard 120 mm mounting points.

特長

  • MagForce 2.0 doubles pogo-pin contact area for stable ARGB sync
  • Luminous side frames add diffused glow beyond front and rear lighting
  • Hydraulic bearing runs at 25.7 dB-A for quiet operation up to 2000 RPM
  • 34 CFM airflow and 2.86 mm-H2O pressure suit radiator and case use
  • Nine LCP blades cut vibration while maintaining high static pressure and flow

仕様

BrandThermaltake
ModelCL-F211-PL12SW-A
Fan Counts3 Fans
TypeCase Fan
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500 ~ 2000 R.P.M
Air Flow59.34 CFM (one fan)
Noise Level25.7 dB-A (one fan)
Power Connector2510-4 Pin
5V ARGB header-3Pin
ColorWhite
LEDARGB
配送重量0.89 kg
梱包サイズ155 × 130 × 89 mm

この商品に関する質問

How loud are the three fans when running at full speed all day?

Each fan reaches 25.7 dB-A at 2000 RPM, so the trio stays at that level per unit under sustained load.

Does my motherboard need a specific header for the 5V ARGB lighting?

Yes, a 5V 3-pin ARGB header is required to control the lighting via motherboard software.

Will the 2.86 mm-H2O static pressure work with an older radiator that has dense fins?

The 2.86 mm-H2O rating is designed for both air and water cooling, providing enough force for restrictive radiators.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。