Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Three white 120mm ARGB case fans with luminous frames and MagForce 2.0 connectors

Thermaltake

Thermaltake CL-F211-PL12SW-A 120mm ARGB case fan 3-pack white

SKU CH-EZCG-Y3GQQ MPN CL-F211-PL12SW-A

Three 120 mm hydraulic-bearing fans deliver 59.34 CFM airflow at up to 2000 RPM with 2.86 mm-H₂O static pressure and 5 V ARGB sync

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPMPWM 500 ~ 2000 R.P.M
  • MagForce 2.0 doubles pogo-pin contact area for stable ARGB sync
  • Luminous side frames add diffused glow beyond front and rear lighting
  • Hydraulic bearing runs at 25.7 dB-A for quiet operation up to 2000 RPM
  • 34 CFM airflow and 2.86 mm-H2O pressure suit radiator and case use
  • Nine LCP blades cut vibration while maintaining high static pressure and flow

Three-fan ARGB kit

This three-pack of 120 mm case fans adds addressable RGB lighting and PWM speed control to a build. Each unit spins from 500 to 2000 RPM and connects via a 2510 4-pin power header plus a 5 V 3-pin ARGB header for motherboard sync.

Sustained airflow and pressure

At full speed a single fan delivers 59.34 CFM of airflow and 2.86 mm-H₂O of static pressure while producing 25.7 dB-A of noise. The hydraulic bearing and nine liquid crystal polymer blades are designed to maintain those figures over long sessions without vibration spikes.

MagForce 2.0 mounting and white frame

MagForce 2.0 uses enlarged pogo-pin contact pads to keep the fans firmly aligned on radiators or case mounts. The white finish and luminous side frames give a diffused glow from every angle, and the 25 mm thickness fits standard 120 mm mounting points.

Najważniejsze cechy

  • MagForce 2.0 doubles pogo-pin contact area for stable ARGB sync
  • Luminous side frames add diffused glow beyond front and rear lighting
  • Hydraulic bearing runs at 25.7 dB-A for quiet operation up to 2000 RPM
  • 34 CFM airflow and 2.86 mm-H2O pressure suit radiator and case use
  • Nine LCP blades cut vibration while maintaining high static pressure and flow

Specyfikacja

BrandThermaltake
ModelCL-F211-PL12SW-A
Fan Counts3 Fans
TypeCase Fan
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500 ~ 2000 R.P.M
Air Flow59.34 CFM (one fan)
Noise Level25.7 dB-A (one fan)
Power Connector2510-4 Pin
5V ARGB header-3Pin
ColorWhite
LEDARGB
Waga przesyłki0.89 kg
Wymiary opakowania155 × 130 × 89 mm

Pytania dotyczące tego produktu

How loud are the three fans when running at full speed all day?

Each fan reaches 25.7 dB-A at 2000 RPM, so the trio stays at that level per unit under sustained load.

Does my motherboard need a specific header for the 5V ARGB lighting?

Yes, a 5V 3-pin ARGB header is required to control the lighting via motherboard software.

Will the 2.86 mm-H2O static pressure work with an older radiator that has dense fins?

The 2.86 mm-H2O rating is designed for both air and water cooling, providing enough force for restrictive radiators.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.