Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular silver metal server PSU with 6+4 pin connector visible

WMtec

WMtec H260EBM-00 260W server power supply for Opti-plex 3060 5060 7060 MT

SKU CH-1T20-VMWE4

260W replacement power supply for Opti-plex 3060, 5060 and 7060 MT desktops with 6+4 pin connector

  • Delivers 260 W to power Opti-plex MT systems
  • Accepts 100-240 V input for worldwide use
  • Includes 6+4 pin connector for motherboard fit
  • Matches part numbers H7X3F 3YRNJ 8X63N 52CKC
  • Replaces model variants H260EBM-00 B260EBM-00 L260EBM-00 AC260EBM-00

WMtec H260EBM-00 260W Server PSU

This WMtec H260EBM-00 is a 260W server power supply built for Dell OptiPlex 3060 5060 7060 MT systems. It delivers up to 260 watts from a 100-240V 4.2A 50-60Hz input. The unit carries part numbers H7X3F 3YRNJ 8X63N 52CKC and matches model variants B260EBM-00 L260EBM-00 AC260EBM-00.

Suitable for OptiPlex MT owners needing a direct

This supply fits owners of OptiPlex 3060 5060 7060 MT towers who need a like-for-like 260W unit with the correct 6+4 pin connector. Builders working on small form factor OptiPlex models or on non-Dell platforms should look elsewhere because the pinout and chassis are specific to the MT family.

260W maximum output with 6+4 pin connector

The deciding specification is the 260 watt maximum power rating combined with the 6+4 pin output connector. If the target system requires a different wattage or a different connector layout this unit will not work.

Privalumai

  • Delivers 260 W to power Opti-plex MT systems
  • Accepts 100-240 V input for worldwide use
  • Includes 6+4 pin connector for motherboard fit
  • Matches part numbers H7X3F 3YRNJ 8X63N 52CKC
  • Replaces model variants H260EBM-00 B260EBM-00 L260EBM-00 AC260EBM-00

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How do I install the 260W PSU in an Opti-plex 3060 MT and which connector alignment do people often miss?

Remove the side panel, slide the unit into the chassis until it clicks, then attach the 6+4Pin cable ensuring the notch faces the clip side.

What maintenance will the 260W unit need after extended use in an Opti-plex 5060 MT?

Clean dust from the intake vents and fan grille every six months using compressed air; the internal fan is the only moving part.

At what load does the 260W power supply hit its thermal limit first during sustained operation in an Opti-plex 7060 MT?

Continuous draw near the 260 Watt maximum will trigger the over-temperature protection before the 4.2A input limit is reached.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.