Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Rectangular silver metal server PSU with 6+4 pin connector visible

WMtec

WMtec H260EBM-00 260W server power supply for Opti-plex 3060 5060 7060 MT

SKU CH-1T20-VMWE4

260W replacement power supply for Opti-plex 3060, 5060 and 7060 MT desktops with 6+4 pin connector

  • Delivers 260 W to power Opti-plex MT systems
  • Accepts 100-240 V input for worldwide use
  • Includes 6+4 pin connector for motherboard fit
  • Matches part numbers H7X3F 3YRNJ 8X63N 52CKC
  • Replaces model variants H260EBM-00 B260EBM-00 L260EBM-00 AC260EBM-00

WMtec H260EBM-00 260W Server PSU

This WMtec H260EBM-00 is a 260W server power supply built for Dell OptiPlex 3060 5060 7060 MT systems. It delivers up to 260 watts from a 100-240V 4.2A 50-60Hz input. The unit carries part numbers H7X3F 3YRNJ 8X63N 52CKC and matches model variants B260EBM-00 L260EBM-00 AC260EBM-00.

Suitable for OptiPlex MT owners needing a direct

This supply fits owners of OptiPlex 3060 5060 7060 MT towers who need a like-for-like 260W unit with the correct 6+4 pin connector. Builders working on small form factor OptiPlex models or on non-Dell platforms should look elsewhere because the pinout and chassis are specific to the MT family.

260W maximum output with 6+4 pin connector

The deciding specification is the 260 watt maximum power rating combined with the 6+4 pin output connector. If the target system requires a different wattage or a different connector layout this unit will not work.

Ciri-ciri utama

  • Delivers 260 W to power Opti-plex MT systems
  • Accepts 100-240 V input for worldwide use
  • Includes 6+4 pin connector for motherboard fit
  • Matches part numbers H7X3F 3YRNJ 8X63N 52CKC
  • Replaces model variants H260EBM-00 B260EBM-00 L260EBM-00 AC260EBM-00

Spesifikasi

Belum ada spesifikasi diterbitkan untuk produk ini.

Soalan tentang produk ini

How do I install the 260W PSU in an Opti-plex 3060 MT and which connector alignment do people often miss?

Remove the side panel, slide the unit into the chassis until it clicks, then attach the 6+4Pin cable ensuring the notch faces the clip side.

What maintenance will the 260W unit need after extended use in an Opti-plex 5060 MT?

Clean dust from the intake vents and fan grille every six months using compressed air; the internal fan is the only moving part.

At what load does the 260W power supply hit its thermal limit first during sustained operation in an Opti-plex 7060 MT?

Continuous draw near the 260 Watt maximum will trigger the over-temperature protection before the 4.2A input limit is reached.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.