Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Rectangular silver metal server PSU with 6+4 pin connector visible

WMtec

WMtec H260EBM-00 260W server power supply for Opti-plex 3060 5060 7060 MT

SKU CH-1T20-VMWE4

260W replacement power supply for Opti-plex 3060, 5060 and 7060 MT desktops with 6+4 pin connector

  • Delivers 260 W to power Opti-plex MT systems
  • Accepts 100-240 V input for worldwide use
  • Includes 6+4 pin connector for motherboard fit
  • Matches part numbers H7X3F 3YRNJ 8X63N 52CKC
  • Replaces model variants H260EBM-00 B260EBM-00 L260EBM-00 AC260EBM-00

WMtec H260EBM-00 260W Server PSU

This WMtec H260EBM-00 is a 260W server power supply built for Dell OptiPlex 3060 5060 7060 MT systems. It delivers up to 260 watts from a 100-240V 4.2A 50-60Hz input. The unit carries part numbers H7X3F 3YRNJ 8X63N 52CKC and matches model variants B260EBM-00 L260EBM-00 AC260EBM-00.

Suitable for OptiPlex MT owners needing a direct

This supply fits owners of OptiPlex 3060 5060 7060 MT towers who need a like-for-like 260W unit with the correct 6+4 pin connector. Builders working on small form factor OptiPlex models or on non-Dell platforms should look elsewhere because the pinout and chassis are specific to the MT family.

260W maximum output with 6+4 pin connector

The deciding specification is the 260 watt maximum power rating combined with the 6+4 pin output connector. If the target system requires a different wattage or a different connector layout this unit will not work.

Prednosti

  • Delivers 260 W to power Opti-plex MT systems
  • Accepts 100-240 V input for worldwide use
  • Includes 6+4 pin connector for motherboard fit
  • Matches part numbers H7X3F 3YRNJ 8X63N 52CKC
  • Replaces model variants H260EBM-00 B260EBM-00 L260EBM-00 AC260EBM-00

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How do I install the 260W PSU in an Opti-plex 3060 MT and which connector alignment do people often miss?

Remove the side panel, slide the unit into the chassis until it clicks, then attach the 6+4Pin cable ensuring the notch faces the clip side.

What maintenance will the 260W unit need after extended use in an Opti-plex 5060 MT?

Clean dust from the intake vents and fan grille every six months using compressed air; the internal fan is the only moving part.

At what load does the 260W power supply hit its thermal limit first during sustained operation in an Opti-plex 7060 MT?

Continuous draw near the 260 Watt maximum will trigger the over-temperature protection before the 4.2A input limit is reached.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.