Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 120mm square axial fan 25mm thick three wire 24V

Zyvpee

Zyvpee 4414F/2M 120mm 25mm 24V 135mA 3-wire case fan

SKU CH-PYF0-HSW4R

A 120 mm square DC axial cooler with dual ball bearings, 24 V 135 mA power and a three-wire connector for inverter or case airflow

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector3 wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC square Cooler
  • 120 mm square frame fits standard 12 cm mounting points
  • 25 mm thickness suits typical case and inverter bays
  • 24 V 135 mA draw matches industrial 24 V rails
  • Dual ball bearing reduces wear in continuous operation
  • Three-wire connector enables speed monitoring and control

Compact 24 V axial fan for industrial chassis

The Zyvpee 4414F/2M is a 120 mm square DC axial cooler built for 24 V systems. Its three-wire lead supplies power and a tachometer signal for speed monitoring. The 25 mm thickness fits standard 120 mm mounting holes in server enclosures, inverter cabinets and telecom racks.

Replaces sleeve-bearing fans that seize

The dual ball bearing withstands higher ambient temperatures and constant rotation without the lubricant migration that shortens sleeve life. The upgrade is justified when the chassis runs 24/7 or when vibration from nearby drives would accelerate wear on a simpler bearing.

Steady airflow at 135 mA draw under sustained load

At the rated 24 V the motor pulls 135 mA, delivering consistent static pressure across the square frame without the current spikes seen at start-up. The non-LED black housing adds no electrical noise, making the unit suitable for sensitive inverter environments where power quality matters.

Privalumai

  • 120 mm square frame fits standard 12 cm mounting points
  • 25 mm thickness suits typical case and inverter bays
  • 24 V 135 mA draw matches industrial 24 V rails
  • Dual ball bearing reduces wear in continuous operation
  • Three-wire connector enables speed monitoring and control

Specifikacijos

Series4414F/2M
Model4414F/2M
TypeCase Fan
Bearing Type2 Ball
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions120mm*120mm*25mm

Klausimai apie šią prekę

What are the exact mounting dimensions for the Zyvpee 4414F/2M fan?

The fan measures 120mm x 120mm x 25mm and uses standard 120mm mounting holes compatible with typical case fan positions.

How do I connect the three wires on this 24V fan correctly?

Connect the red wire to 24V positive, black to ground, and the third wire to the motherboard or controller tachometer input for speed monitoring.

What maintenance does the dual ball bearing design require over time?

The 2 ball bearings are sealed and lubricated for life; no relubrication is needed, simply clean dust from the blades periodically to maintain airflow.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.