Zyvpee
Zyvpee 4414F/2M 120mm 25mm 24V 135mA 3-wire case fan
A 120 mm square DC axial cooler with dual ball bearings, 24 V 135 mA power and a three-wire connector for inverter or case airflow
- TypeCase Fan
- Bearing Type2 Ball
- Power Connector3 wires
- ColorBlack
- LEDNon-LED
- FeaturesDC square Cooler
- 120 mm square frame fits standard 12 cm mounting points
- 25 mm thickness suits typical case and inverter bays
- 24 V 135 mA draw matches industrial 24 V rails
- Dual ball bearing reduces wear in continuous operation
- Three-wire connector enables speed monitoring and control
Compact 24 V axial fan for industrial chassis
The Zyvpee 4414F/2M is a 120 mm square DC axial cooler built for 24 V systems. Its three-wire lead supplies power and a tachometer signal for speed monitoring. The 25 mm thickness fits standard 120 mm mounting holes in server enclosures, inverter cabinets and telecom racks.
Replaces sleeve-bearing fans that seize
The dual ball bearing withstands higher ambient temperatures and constant rotation without the lubricant migration that shortens sleeve life. The upgrade is justified when the chassis runs 24/7 or when vibration from nearby drives would accelerate wear on a simpler bearing.
Steady airflow at 135 mA draw under sustained load
At the rated 24 V the motor pulls 135 mA, delivering consistent static pressure across the square frame without the current spikes seen at start-up. The non-LED black housing adds no electrical noise, making the unit suitable for sensitive inverter environments where power quality matters.
Kohokohdat
- 120 mm square frame fits standard 12 cm mounting points
- 25 mm thickness suits typical case and inverter bays
- 24 V 135 mA draw matches industrial 24 V rails
- Dual ball bearing reduces wear in continuous operation
- Three-wire connector enables speed monitoring and control
Tekniset tiedot
| Series | 4414F/2M |
|---|---|
| Model | 4414F/2M |
| Type | Case Fan |
| Bearing Type | 2 Ball |
| Power Connector | 3 wires |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 120mm*120mm*25mm |
Kysymyksiä tästä tuotteesta
What are the exact mounting dimensions for the Zyvpee 4414F/2M fan?
The fan measures 120mm x 120mm x 25mm and uses standard 120mm mounting holes compatible with typical case fan positions.
How do I connect the three wires on this 24V fan correctly?
Connect the red wire to 24V positive, black to ground, and the third wire to the motherboard or controller tachometer input for speed monitoring.
What maintenance does the dual ball bearing design require over time?
The 2 ball bearings are sealed and lubricated for life; no relubrication is needed, simply clean dust from the blades periodically to maintain airflow.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.0000105BTC
Varastossa