Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 120mm square axial fan 25mm thick three wire 24V

Zyvpee

Zyvpee 4414F/2M 120mm 25mm 24V 135mA 3-wire case fan

SKU CH-PYF0-HSW4R

A 120 mm square DC axial cooler with dual ball bearings, 24 V 135 mA power and a three-wire connector for inverter or case airflow

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector3 wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC square Cooler
  • 120 mm square frame fits standard 12 cm mounting points
  • 25 mm thickness suits typical case and inverter bays
  • 24 V 135 mA draw matches industrial 24 V rails
  • Dual ball bearing reduces wear in continuous operation
  • Three-wire connector enables speed monitoring and control

Compact 24 V axial fan for industrial chassis

The Zyvpee 4414F/2M is a 120 mm square DC axial cooler built for 24 V systems. Its three-wire lead supplies power and a tachometer signal for speed monitoring. The 25 mm thickness fits standard 120 mm mounting holes in server enclosures, inverter cabinets and telecom racks.

Replaces sleeve-bearing fans that seize

The dual ball bearing withstands higher ambient temperatures and constant rotation without the lubricant migration that shortens sleeve life. The upgrade is justified when the chassis runs 24/7 or when vibration from nearby drives would accelerate wear on a simpler bearing.

Steady airflow at 135 mA draw under sustained load

At the rated 24 V the motor pulls 135 mA, delivering consistent static pressure across the square frame without the current spikes seen at start-up. The non-LED black housing adds no electrical noise, making the unit suitable for sensitive inverter environments where power quality matters.

Poudarki

  • 120 mm square frame fits standard 12 cm mounting points
  • 25 mm thickness suits typical case and inverter bays
  • 24 V 135 mA draw matches industrial 24 V rails
  • Dual ball bearing reduces wear in continuous operation
  • Three-wire connector enables speed monitoring and control

Specifikacije

Series4414F/2M
Model4414F/2M
TypeCase Fan
Bearing Type2 Ball
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions120mm*120mm*25mm

Vprašanja o tem izdelku

What are the exact mounting dimensions for the Zyvpee 4414F/2M fan?

The fan measures 120mm x 120mm x 25mm and uses standard 120mm mounting holes compatible with typical case fan positions.

How do I connect the three wires on this 24V fan correctly?

Connect the red wire to 24V positive, black to ground, and the third wire to the motherboard or controller tachometer input for speed monitoring.

What maintenance does the dual ball bearing design require over time?

The 2 ball bearings are sealed and lubricated for life; no relubrication is needed, simply clean dust from the blades periodically to maintain airflow.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.