Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 60×25mm 24V DC axial case fan with 2-pin connector

Zyvpee

Zyvpee AFB0624HH 60×25mm 24V .14A 2-pin case fan

SKU CH-0Z56-28RN8

A 60 mm ball-bearing case fan running on 24 V at .14 A with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 24 V DC axial fan runs from standard server rails
  • Ball bearing design extends operating life in continuous use
  • Compact 60 × 60 × 25 mm frame fits tight chassis slots
  • Two-pin connector enables simple polarity-protected installation
  • Non-LED black finish keeps builds clean and professional

60 mm 24 V DC axial fan

The Zyvpee AFB0624HH is a 60 mm square, 25 mm thick case fan that runs on 24 V DC and draws .14 A. It uses a two-pin power connector and ball-bearing construction for continuous airflow in compact enclosures.

Suits tight server or inverter chassis

Builders fitting a 60 mm mounting pattern with a 24 V supply will find this fan a direct match. Buyers who need PWM speed control, a three- or four-pin header, or integrated lighting should look elsewhere.

24 V .14 A two-pin power draw

The fan operates at 24 volts and .14 amperes through a two-pin connector, so the power source must provide that exact voltage and current without additional signal wires.

Privalumai

  • 24 V DC axial fan runs from standard server rails
  • Ball bearing design extends operating life in continuous use
  • Compact 60 × 60 × 25 mm frame fits tight chassis slots
  • Two-pin connector enables simple polarity-protected installation
  • Non-LED black finish keeps builds clean and professional

Specifikacijos

SeriesAFB0624HH
ModelAFB0624HH
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions60*60*25mm

Klausimai apie šią prekę

How do I mount the 60×25 mm frame and connect the 2-pin 24 V .14 A power lead without reversing polarity?

Align the four corner holes of the 60×25 mm frame with the case fan mounts, secure with screws, then plug the 2-pin connector so the red wire meets the 24 V supply and the black wire meets ground; reversing them will prevent the fan from spinning.

When will the ball bearing in the AFB0624HH need replacement under continuous operation?

The ball bearing is rated for long life at 24 V .14 A load; expect to replace the fan only when audible noise or vibration appears, typically after several years of 24/7 use.

At what point does the 24 V .14 A input become the limiting factor during sustained high-speed running?

The 24 V .14 A supply caps the maximum power the motor can draw, so once the fan reaches its design speed the current limit is the first constraint under continuous load.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.