نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 60×25mm 24V DC axial case fan with 2-pin connector

Zyvpee

Zyvpee AFB0624HH 60×25mm 24V .14A 2-pin case fan

SKU CH-0Z56-28RN8

A 60 mm ball-bearing case fan running on 24 V at .14 A with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 24 V DC axial fan runs from standard server rails
  • Ball bearing design extends operating life in continuous use
  • Compact 60 × 60 × 25 mm frame fits tight chassis slots
  • Two-pin connector enables simple polarity-protected installation
  • Non-LED black finish keeps builds clean and professional

60 mm 24 V DC axial fan

The Zyvpee AFB0624HH is a 60 mm square, 25 mm thick case fan that runs on 24 V DC and draws .14 A. It uses a two-pin power connector and ball-bearing construction for continuous airflow in compact enclosures.

Suits tight server or inverter chassis

Builders fitting a 60 mm mounting pattern with a 24 V supply will find this fan a direct match. Buyers who need PWM speed control, a three- or four-pin header, or integrated lighting should look elsewhere.

24 V .14 A two-pin power draw

The fan operates at 24 volts and .14 amperes through a two-pin connector, so the power source must provide that exact voltage and current without additional signal wires.

أبرز المميزات

  • 24 V DC axial fan runs from standard server rails
  • Ball bearing design extends operating life in continuous use
  • Compact 60 × 60 × 25 mm frame fits tight chassis slots
  • Two-pin connector enables simple polarity-protected installation
  • Non-LED black finish keeps builds clean and professional

المواصفات

SeriesAFB0624HH
ModelAFB0624HH
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions60*60*25mm

أسئلة حول هذا المنتج

How do I mount the 60×25 mm frame and connect the 2-pin 24 V .14 A power lead without reversing polarity?

Align the four corner holes of the 60×25 mm frame with the case fan mounts, secure with screws, then plug the 2-pin connector so the red wire meets the 24 V supply and the black wire meets ground; reversing them will prevent the fan from spinning.

When will the ball bearing in the AFB0624HH need replacement under continuous operation?

The ball bearing is rated for long life at 24 V .14 A load; expect to replace the fan only when audible noise or vibration appears, typically after several years of 24/7 use.

At what point does the 24 V .14 A input become the limiting factor during sustained high-speed running?

The 24 V .14 A supply caps the maximum power the motor can draw, so once the fan reaches its design speed the current limit is the first constraint under continuous load.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.