Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 60×25mm 24V DC axial case fan with 2-pin connector

Zyvpee

Zyvpee AFB0624HH 60×25mm 24V .14A 2-pin case fan

SKU CH-0Z56-28RN8

A 60 mm ball-bearing case fan running on 24 V at .14 A with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 24 V DC axial fan runs from standard server rails
  • Ball bearing design extends operating life in continuous use
  • Compact 60 × 60 × 25 mm frame fits tight chassis slots
  • Two-pin connector enables simple polarity-protected installation
  • Non-LED black finish keeps builds clean and professional

60 mm 24 V DC axial fan

The Zyvpee AFB0624HH is a 60 mm square, 25 mm thick case fan that runs on 24 V DC and draws .14 A. It uses a two-pin power connector and ball-bearing construction for continuous airflow in compact enclosures.

Suits tight server or inverter chassis

Builders fitting a 60 mm mounting pattern with a 24 V supply will find this fan a direct match. Buyers who need PWM speed control, a three- or four-pin header, or integrated lighting should look elsewhere.

24 V .14 A two-pin power draw

The fan operates at 24 volts and .14 amperes through a two-pin connector, so the power source must provide that exact voltage and current without additional signal wires.

Kohokohdat

  • 24 V DC axial fan runs from standard server rails
  • Ball bearing design extends operating life in continuous use
  • Compact 60 × 60 × 25 mm frame fits tight chassis slots
  • Two-pin connector enables simple polarity-protected installation
  • Non-LED black finish keeps builds clean and professional

Tekniset tiedot

SeriesAFB0624HH
ModelAFB0624HH
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions60*60*25mm

Kysymyksiä tästä tuotteesta

How do I mount the 60×25 mm frame and connect the 2-pin 24 V .14 A power lead without reversing polarity?

Align the four corner holes of the 60×25 mm frame with the case fan mounts, secure with screws, then plug the 2-pin connector so the red wire meets the 24 V supply and the black wire meets ground; reversing them will prevent the fan from spinning.

When will the ball bearing in the AFB0624HH need replacement under continuous operation?

The ball bearing is rated for long life at 24 V .14 A load; expect to replace the fan only when audible noise or vibration appears, typically after several years of 24/7 use.

At what point does the 24 V .14 A input become the limiting factor during sustained high-speed running?

The 24 V .14 A supply caps the maximum power the motor can draw, so once the fan reaches its design speed the current limit is the first constraint under continuous load.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.