Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 60 by 25 millimetre case fan with maglev bearing and three-pin connector

Zyvpee

Zyvpee HA60251V4-0000-C99 60mm 12V 0.7W 3-pin case fan

SKU CH-G9HT-XQM7E

A 60 mm maglev case fan running at up to 1600 RPM on 12 V with a 3-pin connector

  • TypeCPU Cooler Fan
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.7 W draw keeps power use low
  • 60 mm x 25 mm frame fits tight spaces
  • Three-pin connector enables speed monitoring
  • Under 1600 RPM limit lowers noise output

Compact 60 mm frame for tight builds

This Zyvpee case fan fits a 60 by 25 mm footprint and runs on 12 V through a three-pin connector. It is aimed at builders who need airflow in small-form-factor chassis or on low-profile CPU coolers where larger fans cannot be mounted. The maglev bearing keeps friction low in a slim design.

Maglev bearing rated below 1600 RPM

The single specification that decides fit is the maximum speed of less than 1600 RPM combined with a 0.7 W power draw. This determines whether the airflow and static pressure meet the thermal target of the cooler or case you are populating. No LED lighting is present.

Steady low-power operation under load

At the rated ceiling the fan draws only 0.7 W, so heat output remains minimal during continuous use. The magnetic bearing maintains consistent speed without the wear that affects sleeve or ball alternatives over long periods. Acoustic output stays proportional to the modest RPM range.

Privalumai

  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.7 W draw keeps power use low
  • 60 mm x 25 mm frame fits tight spaces
  • Three-pin connector enables speed monitoring
  • Under 1600 RPM limit lowers noise output

Specifikacijos

BrandZyvpee
SeriesHA60251V4-0000-C99
ModelHA60251V4-0000-C99
TypeCPU Cooler Fan
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNo
FeaturesCPU Cooling
Dimensions60*25MM

Klausimai apie šią prekę

How does the 1600 RPM ceiling translate to airflow in a live chassis?

The fan spins up to 1600 RPM, moving air across a 60 mm by 25 mm frame to pull heat from a CPU cooler or tight case zone.

What does the 3-pin connector limit for speed control?

A 3-pin header supplies 12 V and a tach signal; voltage changes set the speed, so PWM precision is not available.

Will the 60 mm by 25 mm frame fit my existing mount?

The unit measures 60 mm square and 25 mm thick, matching standard 6025 mounting holes for CPU coolers or case vents.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.