Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 60 by 25 millimetre case fan with maglev bearing and three-pin connector

Zyvpee

Zyvpee HA60251V4-0000-C99 60mm 12V 0.7W 3-pin case fan

SKU CH-G9HT-XQM7E

A 60 mm maglev case fan running at up to 1600 RPM on 12 V with a 3-pin connector

  • TypeCPU Cooler Fan
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.7 W draw keeps power use low
  • 60 mm x 25 mm frame fits tight spaces
  • Three-pin connector enables speed monitoring
  • Under 1600 RPM limit lowers noise output

Compact 60 mm frame for tight builds

This Zyvpee case fan fits a 60 by 25 mm footprint and runs on 12 V through a three-pin connector. It is aimed at builders who need airflow in small-form-factor chassis or on low-profile CPU coolers where larger fans cannot be mounted. The maglev bearing keeps friction low in a slim design.

Maglev bearing rated below 1600 RPM

The single specification that decides fit is the maximum speed of less than 1600 RPM combined with a 0.7 W power draw. This determines whether the airflow and static pressure meet the thermal target of the cooler or case you are populating. No LED lighting is present.

Steady low-power operation under load

At the rated ceiling the fan draws only 0.7 W, so heat output remains minimal during continuous use. The magnetic bearing maintains consistent speed without the wear that affects sleeve or ball alternatives over long periods. Acoustic output stays proportional to the modest RPM range.

Přednosti

  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.7 W draw keeps power use low
  • 60 mm x 25 mm frame fits tight spaces
  • Three-pin connector enables speed monitoring
  • Under 1600 RPM limit lowers noise output

Specifikace

BrandZyvpee
SeriesHA60251V4-0000-C99
ModelHA60251V4-0000-C99
TypeCPU Cooler Fan
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNo
FeaturesCPU Cooling
Dimensions60*25MM

Otázky k tomuto produktu

How does the 1600 RPM ceiling translate to airflow in a live chassis?

The fan spins up to 1600 RPM, moving air across a 60 mm by 25 mm frame to pull heat from a CPU cooler or tight case zone.

What does the 3-pin connector limit for speed control?

A 3-pin header supplies 12 V and a tach signal; voltage changes set the speed, so PWM precision is not available.

Will the 60 mm by 25 mm frame fit my existing mount?

The unit measures 60 mm square and 25 mm thick, matching standard 6025 mounting holes for CPU coolers or case vents.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.