Zyvpee
Zyvpee HA60251V4-0000-C99 60mm 12V 0.7W 3-pin case fan
A 60 mm maglev case fan running at up to 1600 RPM on 12 V with a 3-pin connector
- TypeCPU Cooler Fan
- Bearing TypeMaglev
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- LEDNo
- Maglev bearing reduces friction for quieter operation
- 12 V 0.7 W draw keeps power use low
- 60 mm x 25 mm frame fits tight spaces
- Three-pin connector enables speed monitoring
- Under 1600 RPM limit lowers noise output
Compact 60 mm frame for tight builds
This Zyvpee case fan fits a 60 by 25 mm footprint and runs on 12 V through a three-pin connector. It is aimed at builders who need airflow in small-form-factor chassis or on low-profile CPU coolers where larger fans cannot be mounted. The maglev bearing keeps friction low in a slim design.
Maglev bearing rated below 1600 RPM
The single specification that decides fit is the maximum speed of less than 1600 RPM combined with a 0.7 W power draw. This determines whether the airflow and static pressure meet the thermal target of the cooler or case you are populating. No LED lighting is present.
Steady low-power operation under load
At the rated ceiling the fan draws only 0.7 W, so heat output remains minimal during continuous use. The magnetic bearing maintains consistent speed without the wear that affects sleeve or ball alternatives over long periods. Acoustic output stays proportional to the modest RPM range.
Pluspunten
- Maglev bearing reduces friction for quieter operation
- 12 V 0.7 W draw keeps power use low
- 60 mm x 25 mm frame fits tight spaces
- Three-pin connector enables speed monitoring
- Under 1600 RPM limit lowers noise output
Specificaties
| Brand | Zyvpee |
|---|---|
| Series | HA60251V4-0000-C99 |
| Model | HA60251V4-0000-C99 |
| Type | CPU Cooler Fan |
| Bearing Type | Maglev |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | No |
| Features | CPU Cooling |
| Dimensions | 60*25MM |
Vragen over dit artikel
How does the 1600 RPM ceiling translate to airflow in a live chassis?
The fan spins up to 1600 RPM, moving air across a 60 mm by 25 mm frame to pull heat from a CPU cooler or tight case zone.
What does the 3-pin connector limit for speed control?
A 3-pin header supplies 12 V and a tach signal; voltage changes set the speed, so PWM precision is not available.
Will the 60 mm by 25 mm frame fit my existing mount?
The unit measures 60 mm square and 25 mm thick, matching standard 6025 mounting holes for CPU coolers or case vents.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.00001054BTC
Op voorraad