Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black frameless VGA fan with nine blades and 4-pin connector

Zyvpee

Zyvpee MGT5012XF-W10 12V 0.19A 4-pin vga cooling

SKU CH-69DW-60GN1

A 12 V graphics-card cooler with a four-pin power connector and ball-bearing motor

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 0.19 A power draw keeps energy use low
  • Four-pin PWM connector enables precise speed control
  • Ball-bearing design extends operating life
  • Nine frameless blades optimise airflow for graphics cooling
  • Black non-LED finish suits stealth builds

Purpose-built VGA cooler

The Zyvpee MGT5012XF-W10 is a frameless 12 V fan designed to mount directly on a graphics card cooler. Its 4-pin connector allows motherboard or GPU fan-header control for builders replacing a worn original unit.

Sustained-load behaviour

Ball-bearing construction keeps rotational stability consistent during long rendering or gaming sessions. The 0.19 A draw remains steady so the speed curve does not drift as the motor warms up.

Thermals, noise and power

Nine blades move air across the heatsink without LED lighting adding electrical load. The 4-wire PWM interface lets the system lower RPM at idle, reducing acoustic output while maintaining targeted GPU temperatures.

Privalumai

  • 12 V 0.19 A power draw keeps energy use low
  • Four-pin PWM connector enables precise speed control
  • Ball-bearing design extends operating life
  • Nine frameless blades optimise airflow for graphics cooling
  • Black non-LED finish suits stealth builds

Specifikacijos

BrandZyvpee
SeriesMGT5012XF-W10
ModelMGT5012XF-W10
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
Featuresvga fan
Package Contentsrefer to title

Klausimai apie šią prekę

How much noise and heat does the 12 V 0.19 A 4-pin VGA fan add when it runs continuously?

The ball-bearing frameless design with nine blades is built for steady airflow; at 12 V and 0.19 A the motor draws minimal power, so heat contribution inside the case stays low.

What connector must my graphics card or fan header provide for this 4-pin VGA cooler to work?

It requires a standard 4-pin PWM header supplying 12 V; the four-wire plug carries power, ground, speed sensing and PWM control.

Will the 5012-series frameless fan fit alongside an older dual-slot graphics card that uses a shroud-mounted cooler?

The compact frameless body and nine-blade rotor are designed to mount on VGA heatsinks with 5012 spacing, leaving room for most legacy shroud coolers.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.