Zyvpee
Zyvpee MGT5012XF-W10 12V 0.19A 4-pin vga cooling
A 12 V graphics-card cooler with a four-pin power connector and ball-bearing motor
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing TypeBall
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- 12 V 0.19 A power draw keeps energy use low
- Four-pin PWM connector enables precise speed control
- Ball-bearing design extends operating life
- Nine frameless blades optimise airflow for graphics cooling
- Black non-LED finish suits stealth builds
Purpose-built VGA cooler
The Zyvpee MGT5012XF-W10 is a frameless 12 V fan designed to mount directly on a graphics card cooler. Its 4-pin connector allows motherboard or GPU fan-header control for builders replacing a worn original unit.
Sustained-load behaviour
Ball-bearing construction keeps rotational stability consistent during long rendering or gaming sessions. The 0.19 A draw remains steady so the speed curve does not drift as the motor warms up.
Thermals, noise and power
Nine blades move air across the heatsink without LED lighting adding electrical load. The 4-wire PWM interface lets the system lower RPM at idle, reducing acoustic output while maintaining targeted GPU temperatures.
Kohokohdat
- 12 V 0.19 A power draw keeps energy use low
- Four-pin PWM connector enables precise speed control
- Ball-bearing design extends operating life
- Nine frameless blades optimise airflow for graphics cooling
- Black non-LED finish suits stealth builds
Tekniset tiedot
| Brand | Zyvpee |
|---|---|
| Series | MGT5012XF-W10 |
| Model | MGT5012XF-W10 |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | vga fan |
| Package Contents | refer to title |
Kysymyksiä tästä tuotteesta
How much noise and heat does the 12 V 0.19 A 4-pin VGA fan add when it runs continuously?
The ball-bearing frameless design with nine blades is built for steady airflow; at 12 V and 0.19 A the motor draws minimal power, so heat contribution inside the case stays low.
What connector must my graphics card or fan header provide for this 4-pin VGA cooler to work?
It requires a standard 4-pin PWM header supplying 12 V; the four-wire plug carries power, ground, speed sensing and PWM control.
Will the 5012-series frameless fan fit alongside an older dual-slot graphics card that uses a shroud-mounted cooler?
The compact frameless body and nine-blade rotor are designed to mount on VGA heatsinks with 5012 spacing, leaving room for most legacy shroud coolers.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001038BTC
Varastossa