暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black frameless VGA fan with nine blades and 4-pin connector

Zyvpee

Zyvpee MGT5012XF-W10 12V 0.19A 4-pin vga cooling

SKU CH-69DW-60GN1

A 12 V graphics-card cooler with a four-pin power connector and ball-bearing motor

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 0.19 A power draw keeps energy use low
  • Four-pin PWM connector enables precise speed control
  • Ball-bearing design extends operating life
  • Nine frameless blades optimise airflow for graphics cooling
  • Black non-LED finish suits stealth builds

Purpose-built VGA cooler

The Zyvpee MGT5012XF-W10 is a frameless 12 V fan designed to mount directly on a graphics card cooler. Its 4-pin connector allows motherboard or GPU fan-header control for builders replacing a worn original unit.

Sustained-load behaviour

Ball-bearing construction keeps rotational stability consistent during long rendering or gaming sessions. The 0.19 A draw remains steady so the speed curve does not drift as the motor warms up.

Thermals, noise and power

Nine blades move air across the heatsink without LED lighting adding electrical load. The 4-wire PWM interface lets the system lower RPM at idle, reducing acoustic output while maintaining targeted GPU temperatures.

特長

  • 12 V 0.19 A power draw keeps energy use low
  • Four-pin PWM connector enables precise speed control
  • Ball-bearing design extends operating life
  • Nine frameless blades optimise airflow for graphics cooling
  • Black non-LED finish suits stealth builds

仕様

BrandZyvpee
SeriesMGT5012XF-W10
ModelMGT5012XF-W10
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
Featuresvga fan
Package Contentsrefer to title

この商品に関する質問

How much noise and heat does the 12 V 0.19 A 4-pin VGA fan add when it runs continuously?

The ball-bearing frameless design with nine blades is built for steady airflow; at 12 V and 0.19 A the motor draws minimal power, so heat contribution inside the case stays low.

What connector must my graphics card or fan header provide for this 4-pin VGA cooler to work?

It requires a standard 4-pin PWM header supplying 12 V; the four-wire plug carries power, ground, speed sensing and PWM control.

Will the 5012-series frameless fan fit alongside an older dual-slot graphics card that uses a shroud-mounted cooler?

The compact frameless body and nine-blade rotor are designed to mount on VGA heatsinks with 5012 spacing, leaving room for most legacy shroud coolers.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。