Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green 240-pin DDR3 RDIMM with black chips and a white label

A-Tech

A-Tech 16GB DDR3 1866MHz ECC Registered RDIMM 2Rx4 Supermicro Certified

SKU CH-94E6-J85Q1

16GB DDR3 1866MHz ECC registered RDIMM, Supermicro certified for reliable server upgrades

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro-certified RDIMM ensures validated compatibility with qualified platforms
  • ECC registered design detects and corrects single-bit errors for data integrity
  • 16 GB dual-rank module expands server capacity for heavier workloads
  • DDR3 1866 MT/s at CL13 delivers responsive throughput for supported systems
  • Standard 1.5 V operation matches DDR3 JEDEC specification for broad platform support

16GB DDR3 ECC RDIMM for servers

This 16GB DDR3 1866MHz ECC Registered DIMM is built for Supermicro platforms that require 2Rx4 registered memory. It suits administrators expanding capacity in compatible rackmount or tower servers running memory-intensive workloads.

Upgrade from lower-capacity or non-ECC DDR3 modules

Replacing smaller RDIMMs with this 16GB module increases total system memory while maintaining registered signal integrity and ECC protection. The jump is worth it when your current configuration hits capacity limits or lacks error correction for critical data.

Verify DDR3 RDIMM slot availability and 1.5V support

Confirm your motherboard accepts 240-pin DDR3 Registered DIMMs at 1.5V and supports 2Rx4 organisation. Check the vendor qualified-vendor list for the exact part number before ordering.

Priekšrocības

  • Supermicro-certified RDIMM ensures validated compatibility with qualified platforms
  • ECC registered design detects and corrects single-bit errors for data integrity
  • 16 GB dual-rank module expands server capacity for heavier workloads
  • DDR3 1866 MT/s at CL13 delivers responsive throughput for supported systems
  • Standard 1.5 V operation matches DDR3 JEDEC specification for broad platform support

Specifikācijas

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR316L-HL03-ER18
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR316L-HL03-ER18 (Hynix)

Jautājumi par šo preci

Does the 240-pin RDIMM fit a standard DDR3 server DIMM slot?

Yes, the 240-pin RDIMM form factor is the standard DDR3 registered DIMM layout and will seat in any compatible DDR3 server memory slot.

Is there a specific order for populating the 2Rx4 registered modules on a Supermicro board?

Supermicro boards typically require registered DIMMs to be installed starting with the slot furthest from the CPU; check the motherboard manual for the exact population sequence.

Will the 1.5V DDR3 modules need any firmware updates or battery changes over time?

No firmware or battery maintenance is required for the memory modules themselves; they operate at the standard 1.5V DDR3 voltage for their service life.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.