Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green circuit boards with black chips and gold contacts lying flat

A-Tech

A-Tech 32GB (4x8GB) DDR5 5200MHz CL42 1.1V Desktop RAM Kit

SKU CH-9M11-M0GJD

A 32 GB quad-channel DDR5 kit running at 5200 MHz with CL42 latency and 1.1 V operation for desktop upgrades

  • Capacity32GB (4 x 8GB)
  • SpeedDDR5 5200 (PC5 41600)
  • Tested Frequency5200
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 32GB (4 x 8GB)

Speed DDR5 5200 (PC5 41600)

CAS Latency CL42

Color Green/Black

  • Green
  • Green/Black

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • 32 GB total capacity across four 8 GB modules
  • DDR5 5200 MHz speed for faster data throughput
  • CL42 latency at 1.1 V standard voltage
  • 288-pin unbuffered DIMM fits modern desktop boards
  • Quad-channel kit enables higher memory bandwidth

32GB Quad-Channel DDR5-5200 Kit

This kit provides 32GB of desktop memory across four 8GB unbuffered DIMMs. It runs at the DDR5 standard voltage of 1.1V with a tested frequency of 5200MHz and CL42 latency. The modules use major-brand DRAM ICs and are built for AMD and Intel platforms that support DDR5 DIMMs.

Suits Builds Needing Four Populated Slots

Systems with four DIMM slots that benefit from quad-channel bandwidth will use this kit directly. Builds that only have two slots, require ECC or registered modules, or need lower latency than CL42 should consider a different configuration.

288-Pin DDR5 DIMM at 1.1V

The decisive specification is the 288-pin DDR5 DIMM form factor operating at 1.1V with a PC5-41600 rating. If the motherboard manual lists DDR5-5200 unbuffered non-ECC support, this kit matches that requirement.

Priekšrocības

  • 32 GB total capacity across four 8 GB modules
  • DDR5 5200 MHz speed for faster data throughput
  • CL42 latency at 1.1 V standard voltage
  • 288-pin unbuffered DIMM fits modern desktop boards
  • Quad-channel kit enables higher memory bandwidth

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
ModelA-Tech 32GB (4x8GB) DDR5-5200 Desktop RAM Kit
Capacity32GB (4 x 8GB)
SpeedDDR5 5200 (PC5 41600)
Tested Frequency5200
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What speed and bandwidth does the DDR5 5200 PC5-41600 rating deliver?

The kit runs at 5200 MT/s with a PC5-41600 bandwidth rating, providing the standard DDR5 data rate for desktop platforms that support this specification.

What physical slot and module dimensions are required for these 288-pin DIMMs?

Each 8 GB module uses the standard 288-pin DDR5 DIMM form factor, so four adjacent DDR5 DIMM slots on a desktop motherboard are needed for the full quad-channel kit.

How do I install the four modules for quad-channel operation, and what step is often missed?

Populate the four slots designated for quad-channel use in your motherboard manual, seat each module until the retention clips click, then enable the 5200 MT/s speed in the BIOS — many builders forget the BIOS step and run at a lower default frequency.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.