Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Four green circuit boards with black chips and gold contacts lying flat

A-Tech

A-Tech 32GB (4x8GB) DDR5 5200MHz CL42 1.1V Desktop RAM Kit

SKU CH-9M11-M0GJD

A 32 GB quad-channel DDR5 kit running at 5200 MHz with CL42 latency and 1.1 V operation for desktop upgrades

  • Capacity32GB (4 x 8GB)
  • SpeedDDR5 5200 (PC5 41600)
  • Tested Frequency5200
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 32GB (4 x 8GB)

Speed DDR5 5200 (PC5 41600)

CAS Latency CL42

Color Green/Black

  • Green
  • Green/Black

Le versioni barrate esistono, ma non sono disponibili qui.

  • 32 GB total capacity across four 8 GB modules
  • DDR5 5200 MHz speed for faster data throughput
  • CL42 latency at 1.1 V standard voltage
  • 288-pin unbuffered DIMM fits modern desktop boards
  • Quad-channel kit enables higher memory bandwidth

32GB Quad-Channel DDR5-5200 Kit

This kit provides 32GB of desktop memory across four 8GB unbuffered DIMMs. It runs at the DDR5 standard voltage of 1.1V with a tested frequency of 5200MHz and CL42 latency. The modules use major-brand DRAM ICs and are built for AMD and Intel platforms that support DDR5 DIMMs.

Suits Builds Needing Four Populated Slots

Systems with four DIMM slots that benefit from quad-channel bandwidth will use this kit directly. Builds that only have two slots, require ECC or registered modules, or need lower latency than CL42 should consider a different configuration.

288-Pin DDR5 DIMM at 1.1V

The decisive specification is the 288-pin DDR5 DIMM form factor operating at 1.1V with a PC5-41600 rating. If the motherboard manual lists DDR5-5200 unbuffered non-ECC support, this kit matches that requirement.

Punti di forza

  • 32 GB total capacity across four 8 GB modules
  • DDR5 5200 MHz speed for faster data throughput
  • CL42 latency at 1.1 V standard voltage
  • 288-pin unbuffered DIMM fits modern desktop boards
  • Quad-channel kit enables higher memory bandwidth

Caratteristiche tecniche

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
ModelA-Tech 32GB (4x8GB) DDR5-5200 Desktop RAM Kit
Capacity32GB (4 x 8GB)
SpeedDDR5 5200 (PC5 41600)
Tested Frequency5200
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What speed and bandwidth does the DDR5 5200 PC5-41600 rating deliver?

The kit runs at 5200 MT/s with a PC5-41600 bandwidth rating, providing the standard DDR5 data rate for desktop platforms that support this specification.

What physical slot and module dimensions are required for these 288-pin DIMMs?

Each 8 GB module uses the standard 288-pin DDR5 DIMM form factor, so four adjacent DDR5 DIMM slots on a desktop motherboard are needed for the full quad-channel kit.

How do I install the four modules for quad-channel operation, and what step is often missed?

Populate the four slots designated for quad-channel use in your motherboard manual, seat each module until the retention clips click, then enable the 5200 MT/s speed in the BIOS — many builders forget the BIOS step and run at a lower default frequency.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.