Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green circuit boards with black chips and gold contacts lying flat

A-Tech

A-Tech 32GB (4x8GB) DDR5 5200MHz CL42 1.1V Desktop RAM Kit

SKU CH-9M11-M0GJD

A 32 GB quad-channel DDR5 kit running at 5200 MHz with CL42 latency and 1.1 V operation for desktop upgrades

  • Capacity32GB (4 x 8GB)
  • SpeedDDR5 5200 (PC5 41600)
  • Tested Frequency5200
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 32GB (4 x 8GB)

Speed DDR5 5200 (PC5 41600)

CAS Latency CL42

Color Green/Black

  • Green
  • Green/Black

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • 32 GB total capacity across four 8 GB modules
  • DDR5 5200 MHz speed for faster data throughput
  • CL42 latency at 1.1 V standard voltage
  • 288-pin unbuffered DIMM fits modern desktop boards
  • Quad-channel kit enables higher memory bandwidth

32GB Quad-Channel DDR5-5200 Kit

This kit provides 32GB of desktop memory across four 8GB unbuffered DIMMs. It runs at the DDR5 standard voltage of 1.1V with a tested frequency of 5200MHz and CL42 latency. The modules use major-brand DRAM ICs and are built for AMD and Intel platforms that support DDR5 DIMMs.

Suits Builds Needing Four Populated Slots

Systems with four DIMM slots that benefit from quad-channel bandwidth will use this kit directly. Builds that only have two slots, require ECC or registered modules, or need lower latency than CL42 should consider a different configuration.

288-Pin DDR5 DIMM at 1.1V

The decisive specification is the 288-pin DDR5 DIMM form factor operating at 1.1V with a PC5-41600 rating. If the motherboard manual lists DDR5-5200 unbuffered non-ECC support, this kit matches that requirement.

Helstu kostir

  • 32 GB total capacity across four 8 GB modules
  • DDR5 5200 MHz speed for faster data throughput
  • CL42 latency at 1.1 V standard voltage
  • 288-pin unbuffered DIMM fits modern desktop boards
  • Quad-channel kit enables higher memory bandwidth

Tæknilýsing

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
ModelA-Tech 32GB (4x8GB) DDR5-5200 Desktop RAM Kit
Capacity32GB (4 x 8GB)
SpeedDDR5 5200 (PC5 41600)
Tested Frequency5200
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What speed and bandwidth does the DDR5 5200 PC5-41600 rating deliver?

The kit runs at 5200 MT/s with a PC5-41600 bandwidth rating, providing the standard DDR5 data rate for desktop platforms that support this specification.

What physical slot and module dimensions are required for these 288-pin DIMMs?

Each 8 GB module uses the standard 288-pin DDR5 DIMM form factor, so four adjacent DDR5 DIMM slots on a desktop motherboard are needed for the full quad-channel kit.

How do I install the four modules for quad-channel operation, and what step is often missed?

Populate the four slots designated for quad-channel use in your motherboard manual, seat each module until the retention clips click, then enable the 5200 MT/s speed in the BIOS — many builders forget the BIOS step and run at a lower default frequency.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.