Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green and black DDR5 DIMM modules, 288-pin, no heat spreader

A-Tech

A-Tech 16GB (2x8GB) DDR5 5200MHz CL42 1.1V Desktop RAM Kit

SKU CH-DDTQ-Q2NPN

Dual-channel 16 GB DDR5 kit running at 5200 MHz with CL42 latency and 1.1 V operation

  • Capacity16GB (2 x 8GB)
  • SpeedDDR5 5200 (PC5 41600)
  • Tested Frequency5200
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 16GB (2 x 8GB)

Speed DDR5 5200 (PC5 41600)

CAS Latency CL42

Color Green/Black

  • Green
  • Green/Black

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Dual-channel 16 GB kit doubles throughput for multitasking
  • DDR5 5200 MT/s speed accelerates data-intensive workloads
  • CL42 latency keeps response tight under load
  • 1 V standard voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits modern desktop boards

Kit composition and DDR5 standard

This kit contains two unbuffered DIMM modules totalling 16 GB of DDR5 memory. Each stick runs at 5200 MT/s with a tested latency of CL42 and operates at the standard 1.1 V.

Suitability and limits

The dual-channel set suits desktop towers that accept 288-pin DDR5 DIMMs at 5200 speed and do not require ECC or registered modules. Systems needing error-correcting code, higher frequencies, lower latencies or heat spreaders should choose a different kit.

Deciding specification

The critical figure is the 5200 MT/s DDR5 speed combined with CL42 timing at 1.1 V; the motherboard and CPU must both support this exact data rate and voltage for the memory to function.

Helstu kostir

  • Dual-channel 16 GB kit doubles throughput for multitasking
  • DDR5 5200 MT/s speed accelerates data-intensive workloads
  • CL42 latency keeps response tight under load
  • 1 V standard voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits modern desktop boards

Tæknilýsing

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
ModelA-Tech 16GB (2x8GB) DDR5-5200 Desktop RAM Kit
Capacity16GB (2 x 8GB)
SpeedDDR5 5200 (PC5 41600)
Tested Frequency5200
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 288-pin DIMM modules fit a standard DDR5 desktop motherboard slot?

Yes, each 8 GB module uses the 288-pin DDR5 DIMM form factor that matches current desktop memory sockets.

What BIOS setting is required to run the kit at its rated 5200 MHz CL42 speed?

Enable the DDR5-5200 XMP or EXPO profile in the BIOS; leaving the board on auto defaults will often run the memory at a lower JEDEC speed.

Does the lack of a heat spreader mean the modules need active airflow to stay within the 1.1 V operating range?

The 1.1 V DDR5 standard voltage keeps thermals low, but case airflow over the bare green PCB is recommended for sustained heavy workloads.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.