Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

A-Tech

A-Tech 16GB (2x8GB) DDR5 5200MHz CL42 1.1V Desktop RAM Kit

SKU CH-DDTQ-Q2NPN

Dual-channel 16 GB DDR5 kit running at 5200 MHz with CL42 latency and 1.1 V operation

  • Capacity16GB (2 x 8GB)
  • SpeedDDR5 5200 (PC5 41600)
  • Tested Frequency5200
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Speed DDR5 5200 (PC5 41600)

CAS Latency|Color CL42|Green/Black

  • Dual-channel 16 GB kit doubles throughput for multitasking
  • DDR5 5200 MT/s speed accelerates data-intensive workloads
  • CL42 latency keeps response tight under load
  • 1 V standard voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits modern desktop boards

Kit composition and DDR5 standard

This kit contains two unbuffered DIMM modules totalling 16 GB of DDR5 memory. Each stick runs at 5200 MT/s with a tested latency of CL42 and operates at the standard 1.1 V.

Suitability and limits

The dual-channel set suits desktop towers that accept 288-pin DDR5 DIMMs at 5200 speed and do not require ECC or registered modules. Systems needing error-correcting code, higher frequencies, lower latencies or heat spreaders should choose a different kit.

Deciding specification

The critical figure is the 5200 MT/s DDR5 speed combined with CL42 timing at 1.1 V; the motherboard and CPU must both support this exact data rate and voltage for the memory to function.

Points forts

  • Dual-channel 16 GB kit doubles throughput for multitasking
  • DDR5 5200 MT/s speed accelerates data-intensive workloads
  • CL42 latency keeps response tight under load
  • 1 V standard voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits modern desktop boards

Caractéristiques

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
ModelA-Tech 16GB (2x8GB) DDR5-5200 Desktop RAM Kit
Capacity16GB (2 x 8GB)
SpeedDDR5 5200 (PC5 41600)
Tested Frequency5200
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Will the 288-pin DIMM modules fit a standard DDR5 desktop motherboard slot?

Yes, each 8 GB module uses the 288-pin DDR5 DIMM form factor that matches current desktop memory sockets.

What BIOS setting is required to run the kit at its rated 5200 MHz CL42 speed?

Enable the DDR5-5200 XMP or EXPO profile in the BIOS; leaving the board on auto defaults will often run the memory at a lower JEDEC speed.

Does the lack of a heat spreader mean the modules need active airflow to stay within the 1.1 V operating range?

The 1.1 V DDR5 standard voltage keeps thermals low, but case airflow over the bare green PCB is recommended for sustained heavy workloads.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.