Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green and black DDR5 DIMM modules, 288-pin, no heat spreader

A-Tech

A-Tech 16GB (2x8GB) DDR5 5200MHz CL42 1.1V Desktop RAM Kit

SKU CH-DDTQ-Q2NPN

Dual-channel 16 GB DDR5 kit running at 5200 MHz with CL42 latency and 1.1 V operation

  • Capacity16GB (2 x 8GB)
  • SpeedDDR5 5200 (PC5 41600)
  • Tested Frequency5200
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 16GB (2 x 8GB)

Speed DDR5 5200 (PC5 41600)

CAS Latency CL42

Color Green/Black

  • Green
  • Green/Black

Le versioni barrate esistono, ma non sono disponibili qui.

  • Dual-channel 16 GB kit doubles throughput for multitasking
  • DDR5 5200 MT/s speed accelerates data-intensive workloads
  • CL42 latency keeps response tight under load
  • 1 V standard voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits modern desktop boards

Kit composition and DDR5 standard

This kit contains two unbuffered DIMM modules totalling 16 GB of DDR5 memory. Each stick runs at 5200 MT/s with a tested latency of CL42 and operates at the standard 1.1 V.

Suitability and limits

The dual-channel set suits desktop towers that accept 288-pin DDR5 DIMMs at 5200 speed and do not require ECC or registered modules. Systems needing error-correcting code, higher frequencies, lower latencies or heat spreaders should choose a different kit.

Deciding specification

The critical figure is the 5200 MT/s DDR5 speed combined with CL42 timing at 1.1 V; the motherboard and CPU must both support this exact data rate and voltage for the memory to function.

Punti di forza

  • Dual-channel 16 GB kit doubles throughput for multitasking
  • DDR5 5200 MT/s speed accelerates data-intensive workloads
  • CL42 latency keeps response tight under load
  • 1 V standard voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits modern desktop boards

Caratteristiche tecniche

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
ModelA-Tech 16GB (2x8GB) DDR5-5200 Desktop RAM Kit
Capacity16GB (2 x 8GB)
SpeedDDR5 5200 (PC5 41600)
Tested Frequency5200
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will the 288-pin DIMM modules fit a standard DDR5 desktop motherboard slot?

Yes, each 8 GB module uses the 288-pin DDR5 DIMM form factor that matches current desktop memory sockets.

What BIOS setting is required to run the kit at its rated 5200 MHz CL42 speed?

Enable the DDR5-5200 XMP or EXPO profile in the BIOS; leaving the board on auto defaults will often run the memory at a lower JEDEC speed.

Does the lack of a heat spreader mean the modules need active airflow to stay within the 1.1 V operating range?

The 1.1 V DDR5 standard voltage keeps thermals low, but case airflow over the bare green PCB is recommended for sustained heavy workloads.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.