NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
32 GB DDR3 1866 ECC LRDIMM module with CL13 latency and 1.5 V operation for compatible IBM-Lenovo servers
This 32GB DDR3 1866 ECC LRDIMM module is built for IBM-Lenovo servers and workstations that require load-reduced memory. It operates at 1.5V with a CAS latency of 13 and uses a 4Rx4 rank configuration. The 240-pin DIMM fits systems specifying part numbers 46W0760, 46W0761, 46W0763, or 47J0244.
The load-reduced design lowers electrical loading on the memory bus, helping the server maintain stability when all DIMM slots are populated. ECC circuitry corrects single-bit errors in real time, preventing data corruption during long compute runs. Standard 1.5V DDR3 voltage keeps power draw predictable under continuous multi-threaded workloads.
This module replaces smaller DDR3 registered DIMMs when the platform supports LRDIMM topology and 4Rx4 addressing. The jump is worthwhile when the system memory limit has been reached with standard ranks and the workload demands higher density per slot. Verify the server memory qualification list before purchase, as LRDIMM and RDIMM types cannot be mixed.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at the standard DDR3 voltage of 1.50V. As a Load Reduced DIMM it places less electrical load on the memory bus than a standard registered DIMM, which helps limit heat output during sustained server workloads.
Your system needs DDR3 memory slots that support 240-pin LRDIMM modules at 1866MHz, ECC capability, and a memory controller able to address 4Rx4 ranks. Verify the motherboard or server documentation lists these exact requirements before purchase.
Mixing Load Reduced DIMMs with standard Registered DIMMs is generally not supported because they present different electrical loads to the memory controller. Check the server's memory population rules to confirm whether homogeneous LRDIMM populations are required.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?