NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
32 GB DDR3 1866 ECC LRDIMM module with CL13 latency and 1.5 V operation for compatible IBM-Lenovo servers
This 32GB DDR3 1866 ECC LRDIMM module is built for IBM-Lenovo servers and workstations that require load-reduced memory. It operates at 1.5V with a CAS latency of 13 and uses a 4Rx4 rank configuration. The 240-pin DIMM fits systems specifying part numbers 46W0760, 46W0761, 46W0763, or 47J0244.
The load-reduced design lowers electrical loading on the memory bus, helping the server maintain stability when all DIMM slots are populated. ECC circuitry corrects single-bit errors in real time, preventing data corruption during long compute runs. Standard 1.5V DDR3 voltage keeps power draw predictable under continuous multi-threaded workloads.
This module replaces smaller DDR3 registered DIMMs when the platform supports LRDIMM topology and 4Rx4 addressing. The jump is worthwhile when the system memory limit has been reached with standard ranks and the workload demands higher density per slot. Verify the server memory qualification list before purchase, as LRDIMM and RDIMM types cannot be mixed.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at the standard DDR3 voltage of 1.50V. As a Load Reduced DIMM it places less electrical load on the memory bus than a standard registered DIMM, which helps limit heat output during sustained server workloads.
Your system needs DDR3 memory slots that support 240-pin LRDIMM modules at 1866MHz, ECC capability, and a memory controller able to address 4Rx4 ranks. Verify the motherboard or server documentation lists these exact requirements before purchase.
Mixing Load Reduced DIMMs with standard Registered DIMMs is generally not supported because they present different electrical loads to the memory controller. Check the server's memory population rules to confirm whether homogeneous LRDIMM populations are required.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?