NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
A-Tech
32 GB DDR3 1866 ECC LRDIMM module with CL13 latency and 1.5 V operation for compatible IBM-Lenovo servers
This 32GB DDR3 1866 ECC LRDIMM module is built for IBM-Lenovo servers and workstations that require load-reduced memory. It operates at 1.5V with a CAS latency of 13 and uses a 4Rx4 rank configuration. The 240-pin DIMM fits systems specifying part numbers 46W0760, 46W0761, 46W0763, or 47J0244.
The load-reduced design lowers electrical loading on the memory bus, helping the server maintain stability when all DIMM slots are populated. ECC circuitry corrects single-bit errors in real time, preventing data corruption during long compute runs. Standard 1.5V DDR3 voltage keeps power draw predictable under continuous multi-threaded workloads.
This module replaces smaller DDR3 registered DIMMs when the platform supports LRDIMM topology and 4Rx4 addressing. The jump is worthwhile when the system memory limit has been reached with standard ranks and the workload demands higher density per slot. Verify the server memory qualification list before purchase, as LRDIMM and RDIMM types cannot be mixed.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at the standard DDR3 voltage of 1.50V. As a Load Reduced DIMM it places less electrical load on the memory bus than a standard registered DIMM, which helps limit heat output during sustained server workloads.
Your system needs DDR3 memory slots that support 240-pin LRDIMM modules at 1866MHz, ECC capability, and a memory controller able to address 4Rx4 ranks. Verify the motherboard or server documentation lists these exact requirements before purchase.
Mixing Load Reduced DIMMs with standard Registered DIMMs is generally not supported because they present different electrical loads to the memory controller. Check the server's memory population rules to confirm whether homogeneous LRDIMM populations are required.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?