NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
32GB DDR5 4800 desktop DIMM, CL40 at 1.1V, unbuffered non-ECC, 288-pin Micron chipset replacement for MTC16C2085S1UC48B and MTC16C2085S1UC48BA1
This 32GB DDR5 4800 DIMM is built as a direct replacement for Micron MTC16C2085S1UC48B and MTC16C2085S1UC48BA1 modules. It targets desktop owners who need a single 32GB stick to expand capacity or replace a failed unit. The module runs at the standard 1.1V DDR5 voltage with CL40 latency.
The 288-pin DIMM seats in any standard DDR5 desktop slot without tools or configuration changes. Most problems arise when the motherboard firmware has not been updated to support 4800 MT/s speeds or when the board limits maximum capacity per slot below 32GB. A mismatch in rank architecture can also prevent the system from posting.
Confirm that your desktop motherboard officially supports DDR5 memory and lists 4800 MT/s (PC5-38400) as a validated speed. Verify the maximum supported capacity per DIMM slot is at least 32GB and that the board accepts unbuffered non-ECC UDIMMs. Cross-reference the Micron part numbers above with your system vendor's qualified vendor list.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MTC16C2085S1UC48B, MTC16C2085S1UC48BA1 |
| Capacity | 32GB |
| Speed | DDR5 4800 (PC5 38400) |
| Tested Frequency | 4800 |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Micron Chipset |
| Heat Spreader | No |
| Features | MTC16C2085S1UC48B, MTC16C2085S1UC48BA1 |
| Recommend Use | Compatible Replacement for Micron MTC16C2085S1UC48B, MTC16C2085S1UC48BA1 |
Yes, it uses the 288-pin DDR5 DIMM form factor used by current desktop motherboards.
The module runs at 4800 MT/s with a standard 1.1 V DDR5 voltage; your board must support DDR5 at that speed and voltage.
Mixing capacities is possible if both modules are DDR5 4800 non-ECC unbuffered, but matched kits give the most stable operation.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?