Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 32GB DDR5 4800 Desktop RAM 2Rx8

SKU CH-DJXX-EK1PB

32GB DDR5 4800 desktop DIMM, CL40 at 1.1V, unbuffered non-ECC, 288-pin Micron chipset replacement for MTC16C2085S1UC48B and MTC16C2085S1UC48BA1

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • Tested Frequency4800
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo
  • 32 GB capacity lets you run demanding workloads and multitask smoothly
  • DDR5 4800 speed delivers high bandwidth for responsive performance
  • CL40 latency keeps data access quick for everyday computing
  • 1 V operation matches the DDR5 standard for efficient power use
  • 288-pin DIMM fits standard desktop memory slots

32GB DDR5 4800 Desktop Module

This 32GB DDR5 4800 DIMM is built as a direct replacement for Micron MTC16C2085S1UC48B and MTC16C2085S1UC48BA1 modules. It targets desktop owners who need a single 32GB stick to expand capacity or replace a failed unit. The module runs at the standard 1.1V DDR5 voltage with CL40 latency.

Installation and common issues

The 288-pin DIMM seats in any standard DDR5 desktop slot without tools or configuration changes. Most problems arise when the motherboard firmware has not been updated to support 4800 MT/s speeds or when the board limits maximum capacity per slot below 32GB. A mismatch in rank architecture can also prevent the system from posting.

Compatibility checks before ordering

Confirm that your desktop motherboard officially supports DDR5 memory and lists 4800 MT/s (PC5-38400) as a validated speed. Verify the maximum supported capacity per DIMM slot is at least 32GB and that the board accepts unbuffered non-ECC UDIMMs. Cross-reference the Micron part numbers above with your system vendor's qualified vendor list.

Kohokohdat

  • 32 GB capacity lets you run demanding workloads and multitask smoothly
  • DDR5 4800 speed delivers high bandwidth for responsive performance
  • CL40 latency keeps data access quick for everyday computing
  • 1 V operation matches the DDR5 standard for efficient power use
  • 288-pin DIMM fits standard desktop memory slots

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTC16C2085S1UC48B, MTC16C2085S1UC48BA1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
Tested Frequency4800
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMicron Chipset
Heat SpreaderNo
FeaturesMTC16C2085S1UC48B, MTC16C2085S1UC48BA1
Recommend UseCompatible Replacement for Micron MTC16C2085S1UC48B, MTC16C2085S1UC48BA1

Kysymyksiä tästä tuotteesta

Will this 32GB DDR5 module fit a standard desktop DIMM slot?

Yes, it uses the 288-pin DDR5 DIMM form factor used by current desktop motherboards.

Does my motherboard need to support DDR5 4800 and 1.1 V for this RAM to work?

The module runs at 4800 MT/s with a standard 1.1 V DDR5 voltage; your board must support DDR5 at that speed and voltage.

Can I use this stick alongside an existing DDR5 module of a different capacity?

Mixing capacities is possible if both modules are DDR5 4800 non-ECC unbuffered, but matched kits give the most stable operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.