Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

A-Tech

A-Tech 32GB DDR5 4800 Desktop RAM 2Rx8

SKU CH-DJXX-EK1PB

32GB DDR5 4800 desktop DIMM, CL40 at 1.1V, unbuffered non-ECC, 288-pin Micron chipset replacement for MTC16C2085S1UC48B and MTC16C2085S1UC48BA1

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • Tested Frequency4800
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo
  • 32 GB capacity lets you run demanding workloads and multitask smoothly
  • DDR5 4800 speed delivers high bandwidth for responsive performance
  • CL40 latency keeps data access quick for everyday computing
  • 1 V operation matches the DDR5 standard for efficient power use
  • 288-pin DIMM fits standard desktop memory slots

32GB DDR5 4800 Desktop Module

This 32GB DDR5 4800 DIMM is built as a direct replacement for Micron MTC16C2085S1UC48B and MTC16C2085S1UC48BA1 modules. It targets desktop owners who need a single 32GB stick to expand capacity or replace a failed unit. The module runs at the standard 1.1V DDR5 voltage with CL40 latency.

Installation and common issues

The 288-pin DIMM seats in any standard DDR5 desktop slot without tools or configuration changes. Most problems arise when the motherboard firmware has not been updated to support 4800 MT/s speeds or when the board limits maximum capacity per slot below 32GB. A mismatch in rank architecture can also prevent the system from posting.

Compatibility checks before ordering

Confirm that your desktop motherboard officially supports DDR5 memory and lists 4800 MT/s (PC5-38400) as a validated speed. Verify the maximum supported capacity per DIMM slot is at least 32GB and that the board accepts unbuffered non-ECC UDIMMs. Cross-reference the Micron part numbers above with your system vendor's qualified vendor list.

Points forts

  • 32 GB capacity lets you run demanding workloads and multitask smoothly
  • DDR5 4800 speed delivers high bandwidth for responsive performance
  • CL40 latency keeps data access quick for everyday computing
  • 1 V operation matches the DDR5 standard for efficient power use
  • 288-pin DIMM fits standard desktop memory slots

Caractéristiques

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTC16C2085S1UC48B, MTC16C2085S1UC48BA1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
Tested Frequency4800
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMicron Chipset
Heat SpreaderNo
FeaturesMTC16C2085S1UC48B, MTC16C2085S1UC48BA1
Recommend UseCompatible Replacement for Micron MTC16C2085S1UC48B, MTC16C2085S1UC48BA1

Questions sur cet article

Will this 32GB DDR5 module fit a standard desktop DIMM slot?

Yes, it uses the 288-pin DDR5 DIMM form factor used by current desktop motherboards.

Does my motherboard need to support DDR5 4800 and 1.1 V for this RAM to work?

The module runs at 4800 MT/s with a standard 1.1 V DDR5 voltage; your board must support DDR5 at that speed and voltage.

Can I use this stick alongside an existing DDR5 module of a different capacity?

Mixing capacities is possible if both modules are DDR5 4800 non-ECC unbuffered, but matched kits give the most stable operation.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.